Search results

This is a pic I grabbed from someone in this forum. This was super helpful to me when i started doing stripboard builds.

And B50k pots...

Nice build. I have this one just about ready to go so it's cool to see and hear your demo. I personally love MOSFETS for my rig. Good stuff dude.

F**k that looks good.

The R on the blue wire is the CLR correct? And thanks for the info. Thankfully no popping. I wasn't sure really how to do this. My scenario is I have a tuner but's in built into the volume pedal so the only way to switch guitars on-stage is to put the amp in standby. But that causes some delay.

Ahh okay. I will just connect a cable from the LED cathode to ground somewhere. Good call

How would I remedy it? Can I just jumper lug 5 and 6 on the switch?

I built this quick and dirty mute switch to mute my rig while changing guitars on stage. I used this drawing I used a 3PDT on/on toggle switch and it works fine to mute the signal but I was hoping with the bicolor LED (common cathode) it would turn red when off and green when on. I'm only...

Thanks! Not UV. It's white waterslide decal with clear gloss spray over top.

Nice build! Is that the Lucky Charm enclosure from SBP?

In honor of Pi day I have a couple vero Muff variants. Not a big fan of vero but I wanted to make these boards. Still a struggle to get the offboard wiring clean. First up is the Emanating Fist XB-70. This is based off a '77 Guild Foxey Lady. It sounds very smooth. Mids switch is pretty...

I used MP38A's in my build. Something NPN, low leakage in the 50-80 hfe range. Small bear seems a bit pricey so if you do have a tester there surprisingly some legit options on transistor lots on eBay.

Thanks, no rush. That is a good point. I did grab the schematic out there and I do have a Muffin board floating around I may just try that.

Very cool! I had to go back and see what this was. Love the idea of it. Did you get this board made? If so, are there any other boards left or possibly have the gerber files for it?

This is one of my favorite fuzz pedals. And I've played alot. One of those ones where I bought the retail version, sold it, bought it again, then sold when I built my own. I built the Effects Layouts version but was not a huge fan of the layout. The PPCB version is much cleaner imo. Plus I think...

Thanks dude. I just got a couple of these HM-2 EQ boards I'm excited at experimenting with https://www.hm2cult.com/product/epitaph-eq-pcb I'm also curious about the GCI HM1. Looks interesting.

#69. Nice. And Nice build. Super clean

Another raucous build from DMI. This is based off the Boss XT-2 but can be modded to adjust the EQ for a maxed-out HM-2 with adjustable mids. It gets pretty close to the EQ curve of the HM-2 which I'm a fan of. Gets pretty nasty. Had a lot of fun building and blasting out my neighbors...

This is pretty much a Deadastronaut FX Space Patrol Fuzz on a PPCB Muffin PCB. Sans rotary knob. The wiring is a mess especially with the 3 LEDs. Works great tho so that's what matters. Have fun with this one. Very cool take on the Muff. Has an interesting slight octave on it.

Nice looking build. I dig the color scheme and the slightly staggered knobs