Search results

  1. T

    Any current sources for LM308 out there?

    I love that seller. Same same, same... same
  2. T

    Don't be surprised if the price of Germanium transistors and diodes goes up

    Dude I feel like I can open a small exhibit.
  3. T

    Don't be surprised if the price of Germanium transistors and diodes goes up

    Clutch!
  4. T

    SOLVED Electrovibe biasing woes

    I got mine from mouser. https://www.mouser.com/ProductDetail/560-7371
  5. T

    SOLVED Electrovibe biasing woes

    I think I got lucky with mine, but I can share my methodology. I was at the same place as you a week ago. The GAIN trimmer controls how bright/power to the bulb. I found that when it was too bright the LDRs wouldn't wobble enough. I think the BIAS trimmer controls the wobble/pulsing. I figured...
  6. T

    Skeptical Buffer V2 w/ Loop

    This pedal was a nice easy build. The biggest challenge was getting the loop working correctly. Thankfully, I had left over shorting jacks from my first amp build. I used one Switchcraft Type 12A and one Switchcraft Type 11. As for the sound of the pedal, I can see how it may help if you have a...
  7. T

    adding a clipping mode switch to the kliche mini

    Is this on a breadboard or the pcb?
  8. T

    Help finding components

    too much work to do that. I use this site at newark supply: https://www.newark.com/uf-nf-pf-capacitor-conversion-table
  9. T

    Help finding components

    https://stompboxparts.com/capacitors/box-film-capacitors-10-pack/ https://stompboxparts.com/capacitors/mlcc-capacitor/
  10. T

    TUTORIAL Circuit Design - Power Supplies

    This just popped up on my feed from Aaron Lanterman. It has more to do with cleaning up OpAmp power/noise with filter caps, but I think this will help make sense of the pedal power schematics.
  11. T

    TPA3118 60W Power Amp Module

    Very intriguing. Would like something like this for my 2x12 can that is hanging out in my room. Or turn my Dream65 into a real amp...
  12. T

    Missing Build Docs / Schematics

    I didn't know these books existed... Thanks for that. Good reading material.
  13. T

    Missing Build Docs / Schematics

    Is there a specific schematic you are looking for?
  14. T

    Source for prebond?

    What solid core are you using? I just have the fat insulation stuff for my amp builds. Is there a thinner insulation one somewhere?
  15. T

    XC Phase trimpot

    3362P is what you need. P vs M is the style/size of 3362 series trim pot. P is top adjustable orientation. M looks like side adjustable. You can check out the 3362P datasheet. It has a rundown of all of them. https://www.bourns.com/docs/product-datasheets/3362.pdf
  16. T

    DEMO AionFX Blueshift (Boss Dimension C)

    Dude love it! I am about to order the Blueshift as well!
  17. T

    TUTORIAL Circuit Design - Power Supplies

    This page is crazy helpful. I just put together a point to point pedal and was getting lots of noise. One 100uF cap on the positive later, silence except for the single coil pickup hum.
  18. T

    DEMO XC Phase (MXR Phase 45/90) - Updated w/Matched JFETs

    I'll make a note when I build mine to use the TL022. Thanks for the tip!
  19. T

    ShamWah (BBE Ben Wah)

    You all are killing me with these Wah pedals!! GASing for one pretty hard. This build looks so clean. Great job!
  20. T

    Missing Build Docs / Schematics

    I think I understand now. If pin 4 Vcc neg is connected to ground in the circuit, the input pins can handle the 36V. Because Vs = 36 -(-0) = 36V Is this on the right track?
Back
Top