Search results

Yea it actually inspired me to get my interface hooked back up. Had this cool little intro thing i was messing with on it. Had to record it so i don’t forget lol

It has been awhile since I’ve posted a build report. I have one of these for me already. And i was trying to come up with something special to do with this LMS powder drop from September… Good friend of mine has mentioned a few times interest in having one, and his birthday is coming up...

That is quite possibly the most confusing true bypass set up I've ever seen. I typically attach pins 1 and 8 aswell but that makes so much more sense than that one you posted.

lacked a tone control. For the particular project I am working on needed a tone control.

Oh and a 10k for the resistor in series. Didnt take much altering or my pcb layout either. Tried a muff control but 100% would need a gain recovery stage and not sure i Liked it better anyways.

I ended up going with mark hammers stupidly wonderful tone control. Sounds good just used a 100k pot with the 2n2.

Yea i think i might some comments on it over at diy say it doesnt do a whole lot either. Annoying i already basically have the board done in diptrace…

Yea there is the floating leg thing. I just thought it was weird he swapped where the two legs were going I guess. I might be misreading the schem as well but it looks to me like he's got which leg is going to ground swapped around as well. But I hate it when they don't really mark a leg...

Its interesting the article shows the scheme different than the layout posted for the tone pot. States .0022uf and the strip board shows a 22n instead of 2n2. Also it shows legs 2/3 attached to to the 22n when the schem only shows on leg attached to the 22n the other two attached to ground…

Ok so i feel like it matters here but will make my layout a lot easier if it doesn’t. After the 10k resistor does the signal have to hit the nodes in order ie if my trace goes to the 2n2 (which now has a tone control pot) with a intersection heading to the clipping diodes that then goes to...

I may hit you up for one of those

I just grab the leg with the lead and never touch them.

I have a dca55 and use it quite a bit. But i have a few regular builds that use germs. Thats about all i use it for is just measuring germaniums. You could probably get away with a rg keen strip board build to do the same thing if all your after is hfe and leakage. I dont remember the...

Exactly what the title says. Anyone know of any other pcbs available for something similar? I know fuzz dog makes one, reviews mention noise issues. And Moonn does as well. Also theres the xr2606 chip which looks like youve got to take the ebay gamble on. Wondering if anyone knows of...

It ended up getting kinda shelved. I planned on making a pcb i could mount the power amp module to clean it up a bit and never did. Theres another thread where he talks about some component changes to the tone job to get it more in line with a line level output to the power amp.

Ended up running 470k+2m2 in series. What i had for 1/8 w values. Does sound quite nice.

Yea i can do that, pretty sure i even have some 1/8th watt ones in those values. Just hate doing it.

I prefer the toggle like you mentioned like the skreddy. I use an on off on ussually for 3 options. The problem with the eqd style to me is that id like to just have “stock” as an option and when ive messed with comparing I can’t really get an identical sound as stock, to my ears at least.

So i finally pulled this board out and saw the gotcha resistors. 2M7 (just when you think you have every used value on hand lol). So anyways these appear to be a voltage divider. I could easily do a series thing but I always that. I was thinking id just shove a 2m2 or 3m3 there, but i...

Id highly recommend getting an audio probe set up. Even the act of just following the signal path through the schematic really can teach you a lot for future troubleshooting.