Search results

I found a 3.5mm width one on digikey for a more reasonable price. I ended up ordering those. Annoying paying shipping for one part grrrr!

So mouser is no longer carrying the ones linked in the product spreadsheet. I found them on newark for over 2$ a cap 🙄 I have some tantalum, can i sub these? And i would have to make sure the + side isnwhere the signal is coming into?

None of these are right. Tl072! Should be right around 9 on pin 8. About half that on all but 4 which should be 0. 2399 pin 1 shpuld be 5v ish. I remember 9-16 should be about half that. I don’t remember the rest off the top of my head but youve got some major issues going on there

i had bought a few ultra cheap breadboard and just put the pots pcb legs into the breadboard. I did mainly common values and didnt worry much about taper. Then would just run jumper wires to it. Im sure rhe breadboards were roached but they were the ultra cheapos

Couple years ago I decided my time was more valuable than stripboard. So many hours troubleshooting a circuit just to find the layout was wrong etc. not to mention 30x30 boards with a kajillions cuts and as many jumpers. Just spend 8 bucks on the board 😂. Or learn to make the easy ones...

I realize i meant to put a 2p4t, I think i can live without indicator lights since it would be rotary.

Quite the typo in the title lol So I’ve got 3 amps I like to use. All are 4 ohm outputs, and they all go to the same 2x12 cab. The problem is getting behind there when i decide i want to use the bassman to unplug the speaker cable from the bandmaster is a real pita (a healthy love if...

Forever stuck at 69…. Anything happening with this? Brilliant me just ordered tonight 28 mins before the sale starts. What kind of noob orders on thursday night. 🙄

What he said. all the boards i make i have the jack in and out at the top of the board and make the board large enough to use headers. It doesnt make the boards anymore expensive for the 125b sized ones at least.

Pin 7 of the 72 stands out voltage wise. I would check values and solder joints there to start.

Is there a modern book that anyone recommends? Ive sucessfully made several pcbs that sound fine. But i know I’m not doing things “best”.

What a shit show. Whatever happens is going to happen but can we just make a decision lol.

Have you checked voltages at the ic’s to verify they are getting power?

I pretty much go are the cables in the correct jacks (i screw this up way too much). Then is stuff getting power then probe it. Anytime theres dry and no wet.

I murdered a few switches early on.

Shipping appeared the same for the slow boat at least

This was the disclaimer 1015 PM PST 2/21. Shown on the shipping page Due to the recent changes in the regulatory policies of the US Customs and Border Protection (CBP), shipments with a customs declared value of $800 or less to the United States may be subject to delays. Additionally...

So yea my nephew texts me today and says “how do i get my bass to sound like for whom the bell tolls”. So once the tearing up with pride passed first thought was the morley thing, not sure what fuzz circuit is in it. But i dont think hes at the point of a wah anyways. Reading sounds like...

I think it might have changed when the new version came out.

Pictures or it didnt happen?