Search results

How do I go about wiring this? I have a bi-color LED RING... https://www.taydaelectronics.com/datasheets/files/wiring_diagram_3_pin.pdf Pin 3 is (+), PIN 1&2 (-), but on a bi-color LED the center pin is the Cathode (-) and the outer pins are (+) . So I'm not sure if the LED ring will work.

Nice!

One of my favorite fuzz....

How much of a difference are you talking about? Did you substitute anything? I finally received my LT1054 for my build and before I start soldering components on the board I would like to know so I don't screw it up.

If I recall I think I did.

By using other than LT1054 does it change the dynamic of the gate? Would you recommend going with the LT1054 and if so what's the reasoning behind it.

About to start this build. If I use the LT1054 I don't have to use the jumper?

I didn't look further into it. I just went with the toggle switch.

I printed out the build docs this morning and notice a few more pages printed from the other day. Then I looked at the Revision date and now I know why.

Make sure you check R18 and make sure it's the correct value. I had the exact same issue and I went through the schematic/drawings several times. When someone suggested check the value. I verified the value several times and my verification was wrong because I had a 4K7k not a 47k. After...

My Duo Phase II LED was constant because I had the wrong resistor value. Might want to check that if you haven't already done so.

(y)

What makes this an awesome build is that it's a nod to the Red Sox. :) Red Sox fan here.. my Texan wife is a Yankee's fan.

I agree. I couldn't get it work with the substitutes. I wasn't expecting any better results from genuine J201, but I was completely wrong.

Received my J201 and everything it works. Now in the process of tweaking. I'm pretty close, but will give it a few days of messing around with it. Also any suggestion on securing the J201 into the sockets better. They feel a little sloppy to me. I was thinking using a glue gun and adding a...

To be honest I just build because I think the pedal would be interesting and I'm a cheap bastard. If I can build it myself I will and save me some coin :) .. This is the reason I wind my own pickups. The only pedal I have built because of an artist will be a Tube Screamer clone. I wanted the...

I'm having issues with mine as well. Found the replacement PF5102 and J112 might be the culprit. I'm just waiting for my real 201 to show.

Can't read all of them some of them have some kind of coating on them. The ones I can read are 2N4401, A64051, and LM7(xxx) can't make out the rest. One looks like 403 450

It's not a pedal, but a chronometer..Have a couple of these and before I take them to the recycling place. Just wondering if anything here that could be used on pedals.

I'm going to order some J201 and see if that changes anything. Mouser has some in stock or I might just try SMD w/TO-PCB92. Not sure if 90° header would be better or just the standard header.