Search results

Definitely gonna try this one! The Ultrastoner was a great recommendation, totally right about the EQ on that one. Have you checked out the Mountainking Megalith? Think you'd dig it!

Maybe just a little "crunch"..

So.. AFTER you wore it around a few days and then to find it mangled in your kicks, you said " I gotta try that out real quick.." ?:geek: Did it add Mojo?

Silicon insulated, pre-tinned solved all the problems I've ever suffered with hook-up wire.

I know its not great, but a "c" clamp or wood clamp could help out alot..

More parts= Moar Mojo??

Possible short on solder side legs 6-7 of 2399? Another on solder side legs 5-6 of TLO72?

I believe you connect gate, source, and drain together. If I'm wrong, I'm sure someone more knowledgeable will be along shortly. With no schematic, it's at best a guess from me..

In my experience, as you get older, just touching wood is not enough anymore. I dont know anything about LDR's , though.

Seem to remember R27 is replaced with a jumper, not sure. I think I might be the source of the "100n" advice. At the time, I was breadboarding a lot, and had some incorrect values other places, so 100n seemed closest. After replacing for original values, 680n sounds pretty good to me; I say...

9 caps is an obnoxious amount?😉

Do not check continuity with the circuit energized!!!!!

Leds have minute differences in turn on voltage. The one that is lowest, turns on first. Once an led starts conducting, any current more than the turn on current is facing essentially no resistance to ground. It cannot then turn on another led. Running a separate power wire and resistor is best...

I never went farther in looking for a better set. When I use ribbon cable now I just use a utility knife to separate the ribbon, then use a good pair of Klein's to strip them individually..

Guys, I gotta tell you, I bought the EXACT same strippers, the yellow Amazon set, and they were terrible! Incidentally, I got em for the same thing, stripping ribbon cable,and it would just maul the ends of the wires. The plastic jaws were warped slightly. And no amount of adjustment would work...

Compare JWST and Hubble! https://www.webbcompare.com/

Tayda has a few.. https://www.taydaelectronics.com/connectors-sockets/jumper-wire-dupont.html

And remember, when you look at those pics, very few of those points of light are stars- they are entire galaxies from billions of years past..o_O

For the " I wanna play it now" answer, I'd say put it in. Your right, it's not in the doc., and IME, the pcb rules over the doc. If it turns out you don't need it, just clip it of the board. I'm sure someone that knows better will be along shortly...

I remember I was in my teens when the Hubble Deep Field was published. Few things, let alone pictures, have effected me more. Here's hoping Webb can snap a pic with the same incredible wonder. (P.s. - It will.) Can't wait for the 12th!!