Search results

Gotcha, thanks, very clear.

I'm actually back to using Pd so i'll check my repo and post a link. Then y'all can provide some input on what would be useful and also contribute.

Hello knobwigglers: This Pythagoras/Unison board over here might actually get built. I got the EEPROM for it, but wrt to cooking other ones: does what you can provide in software vary according to the flavour of PCB you have (since there are a variety of PCBs in the shop)? Signed, Probably...

Since the Rhythmic Delay needs a footswitch, did a relayout. White guy next to blue guy. Now laughing at how all the patch cables obscure everything in this photo. RD is a nice patch.

It can be stupid spendy. If you build modules yourself the cost can go down a lot. But i'm talking you out of it.

Ooh i'll try that.

> the reverse side That is to say, the opposite side than the official box-enclosed design.

Pots are mounted on the reverse side of the PCB. Straight mounting pots keep the sense of the resistance the same. Behind the 12V->9V converter chip, there's a 3-position switch to replace the stomp switch. It provides ON, BYPASS and BLOCK. BLOCK ends up being useful. Jacks are 3.5mm to save...

Yep. UV resin printing. Somewhere in this topic there are more pictures of the blue Mantle Fuzz that's next to this guy.

The orange guy.

> If you read the history of PD interesting! Petal knob assignments work for Terrarium, spatially 1 3 5 2 4 6 Would be good to validate switches, then make a mapping JSON, even if the Petal mapping would work, to be explicit.

Here's the patch for the Cmaj bleep (with an experimental additional 2 knobs for frequency and volume of a fourth tone)

https://cycling74.com/ A Daisy programming pathway called `oopsy` was released. I'm able to make couple of simple examples work so far: * classic bleep - 440 Hz with a volume knob * C chord, with a knob for volume of each of C, E, G. I think of Max as the commercial fork of Pure Data. It is...

Started putting examples in my fork of the PedalPCB repo. I stole C examples from folks here and put a few Pd examples. That said, i can make working bleep patches using Max 8 so i probably won't do much Pd anymore.

Oh, for me i could give up 2 knobs and 2 switches for an encoder and a display.

I started looking to see what kind of display the Seed could use. Anybody figure anything out? I would like to use an little e-ink display.

Are folks currently yanking the Seed out of the enclosure, programming it, then reinserting it? I like to program it without moving anything, and can do that with my rackmount setup except i still have to reach behind and reset. (a) put the Seed on the top with access to the reset button and...

@yazooligan i guess your LoveMySwitches shirt doesn't still have a label showing where the blank came from?

nm just found it. https://github.com/PedalPCB/Terrarium/blob/main/terrarium.h

where does `terrarium.h` come from?