Search results

Just noticed I might of mounted the dip switches upside down. They're spst so it shouldn't matter for on/off functionality I think. Will there be any other problems?

Just finished up the paragon mini build. I think this one turned out pretty good! I went all out and used the NOS diodes and everything. Sounds killer. I also used the gorva, pro footswitches that I got off of lovemyswitches.com. For the enclosure, I sanded it down to 400 grit to give it a nice...

Just finished up this build and it sounds sweet! Not very usable in a band as it just gets drowned out due to lack of mids but awesome sound none the less. Each build I do gets better, and I learn new techniques and better ways to do things as I go.

Yep that was the problem. All good now. Silly mistake. Thanks, everyone, for the help!

Yea I realized that after I took these pictures. Sill no luck

I recently finished an ADHD build and the led works, however there is no signal when in bypass or when engaged. I do get static white noise which gets louder when the knobs are turned up. And the switches when used adjust the noise too. Am I missing something? Any help is greatly appreciated...

wow that's beautiful! would love to see a post on how you get everything so neat... even your solder joints are perfect. What pub cleaner do you use?

Thanks! For the Stomp '75 would you recommend electrolytic or film box type?

I'm working on the muffin fuzz Stomp '75 variant and I noticed that the capacitor pcb mounts have 3 holes. Is there a right type of capacitor to use for this specific variant? Also any advice on which taper to use for the pots? They're all 100k but the type is not listed. Thanks for the help!

and I already tried switching the input and output cables to no avail

I just finished up a Tommy V3 build out of an enclosure very sloppy and fast to see if I even could make it work, and well it passes dry signal when in bypass. However, when the effect is engaged the led lights up but I get no signal. Can anyone help? Thanks

The build docs do not state which type of taper to use for the three 100k pots on the stomp '75 variant of the muffin fuzz. Is it understood to use A100k pots for any that do not have a letter prefix? Or is there a general rule that volume and gain should be linear and tone should be logarithmic...

How can you tell? is there a general rule for when I can use a breakout board versus when I should hand wire it? Thanks

For the ADHD I noticed you can switch between true bypass and buffered. Should I use a normal 3pdt breakout board or should I use the one for buffered effects?

I also just remembered that Morley Makes two varieties of this pedal using the same PCB. One Called the MMW which is just the wah and they also make the MWV which is what I have. I also noticed that there is an empty jumper on the bottom of the board underneath the brown wire. So I assume it...

Thanks!

I'm locating parts for the Tommy III, and the build doc calls for an A25k pot for the volume. Tayda doesn't have these and I can't seem to find them anywhere else. Does anyone know where to find these or If there is a workable alternative?

Hello all, This is my first post on this forum. I am new to pedal building and electronics in general. Currently, I am working on the Hyped Fuzz and the Tommy III builds. I will upload pictures after they are done. So far everything is looking great! I hope I am allowed to post non Pedal PCB...