Search results

you can also check the name of the member who did the relay bypass on his build and ping him with @. Just type @ then the first letters of his name, and click on his name in the list that will pop up.

I guess you could also have wired your pots, to be able to get the pcb away from the DC powerjack, and keep your first enclosure ? with pots connected with wires, the pcb would be less stable, but you can use some piece of foam, plastic or cardboard to keep it steady in the closed enclosure.

If you're sure about the pinout, it could be a bad soldering joint on Q1 or one of the components connected to it. Did you try to reflow the soldering pads in the aera ? You can also do some continuity tests, touching the transistors legs and the leg of the next component in the circuit...

If you need to audioprobe the circuit to narrow down the issue's location, here is the signal path. In red is the main path, in green are alternate paths to check if the signal goes in and comes out of the Drive and Treble controls. If the signal stops somewhere, keep probing to find the exact...

that's the standard pinout for 5088

are you sure the transistors are correctly oriented ? On schematics, the arrow in the transistor symbol is the Emitter, you can do a continuity test to check if your Emitters are going to the right component, according to schematics. An other way to debugg this, would be to follow the signal...

I noticed my bassdude in the only circuit that doesn't pair well with a delay i recently built, MXR M118 delay clone from lectric fx. If the Bassdude is in the signal chain, even bypassed, the repeats simply disappear, i don't know why. It's probably related to output voltages and impedance...

Amazing build ! The design is really well done, with great ideas. I wonder how much would you sell this one ? I'd say somewhere around 100 or 150$ ?

Hello, I recently build an analog delay and noticed some issue in a long signal chain with 10 or 15 various effects, including buffered bypass circuits from Boss or MXR. Some circuits are decreasing the delay's repeats and response, even in bypass, depending on where the delay is connected in...

Can i ask where we can find the audio demo ? You didn't answer about the drip effect ? Sorry if it is a stupid question, i just wonder how it sounds.

inline sockets i think ? https://www.musikding.de/3-Pin-inline-socket

hello, welcome ! First thing that comes to mind is insulating the pots so their back aren't shorting the pcb. A simple piece of cardboard or plastic between the EQ controls and the pcb should prevent that.

Not sure if someone already raised that point but what about EU customers ? I would suppose that most EU people aren't buying on PPCB website directly, the shipment fee from US to EU would be too expansive to make sense, not to mention the shipment delays. We all buy from musikding, i guess...

i have the same problem, it could be a pickup issue if i understood correctly. https://forum.pedalpcb.com/threads/warscythe-volume-loss-and-sub-question.23872/

I'd suggest to remove the excess of solder under the toggleswitch (see reply #6). Remember to be quick because the plastic is heat sensitive, if you heat the toggle's legs too long it can melt the plastic inside and break the mechanism. Then, if reflowing the suspicious soldering joints, fixing...

Nantes ? Ici Rennes. I found my old post, see reply #3 : https://www.diystompboxes.com/smfforum/index.php?topic=126431.msg1208896#msg1208896 In my case it was weird. Adding an extra Rate led introduced some ticking noise much like yours. The circuit remained noisy even after disconnecting the...

I had a similar issue once, trying to add a Rate led on a Dandy Horse (EHX Echo Flanger). If i remember correctly a capacitor fixed it somehow but i can't remember precisely, and i sold this build. Did you try to disconnect the Rate led and see if the pop is still there ?

A chorus is a bit ambitious as a first build. You should probably start with smaller circuits like a Rat or a SHO booster. Looking at your pics, i guess i would try to work on these soldering pads. Lots of them are looking suspicious. Iron set around 400°C. Remove the excess of solder when...

Using this pinout : On the lower IC you should have around 4.5V on pin 5, 9V on pin 8. I guess you made a mistake with the pinout ? And yes The upper IC pin 3 should be at 4.5V too. Other than that the other readings are ok. You can try your luck and reflow all soldering pads around this...

Delyks made a CE-2 pcb with a CE-2b specs toggle to change the bass response. https://www.delykpcb.com/product/2nd-chorale-pcb/ This "W BASS" toggle adds a 22n (C16) to a 12n cap before the Effect Level control. Not sure if this can be applied in the Julia, i just thought that this mod is...