Search results

With a stereo jack, how would I wire that up? I also have these jacks which have a tip switch.

Pedal with power. No engaged/activated. There is a cable from output of pedal to amp. Nothing is plugged into input. Oscillation/feedback produced when twisting knobs, gain and tone on both Kliche and Informant builds that are buffered bypass.

Weird thing that happened: When I “held” the wire for the input jack (between jack and board, because on these buffered pedals the tip for the input jack goes straight to the actual board), the sound went away.

I have tried different cables, amps, outlets, rooms. (It’s the only pedal in my path.)

Yes different power supply and different rooms and different amps.

Kliche (Klone) and DRV (Informant). I have not built any other buffered pedals bedsides those two.

I think you are probably right. Truth is the only way to replicate my issue is to set up the pedal in a manner that most people would not (plugged in only to amp, powered, dimed, then start twisting knobs at random with no guitar plugged in). Especially since the circuit itself has no other issues.

Very weird issue that I am having. Example Video: I incidentally discovered this while doing QA on my pedals - I get squealing when the following conditions occur: (1) Cord plugged in between amp and pedal. (2) Pedal is powered but effect not engaged. (3) No cord plugged into input jack...

Thank you. I just completed my build and this works. I appreciate your response.

Sorry for delay in response. Yes, the idea is to disconnect ("lift"?) the diodes. Here is a picture of my wiring diagram:

I know this is belated but I actually started from scratch from the new revision, and it works. I truly believe it was my shoddy soldering skills combined with my subpar soldering iron. But thanks for the assistance!

Hello, Hell, I am working on a Harmonic Percolator clone. I want to add a bypass switch as seen here: Link. I have drawn up the following diagram. I will be using an SPDT ON/ON switch. Is my diagram correct in my thinking?

Thank you! I will work on those. I’ve actually built 20+ pedals; 10+ from PedalPCB. This is my first PedalPCB that hasn’t functioned. I think I went into this pedal with a poorly tinned iron, which is why some of the joints look really shady.

Good morning, here are the relevant photos.

Good evening. Currently working on the Son of Ben (Benson Preamp) pedal. I am not getting sound when the pedal is engaged - however, the LED is turning. Furthermore, I have built an audio probe, and it appears the signal drops when I reach C6 in the schematic. To note: I used jumpers for...

I’m curious and I can’t find info on the subject.

Picture and gut shot.

Quick and fun build. I really love how this pedal sounds; high gain but full bodied. I play music in the vain of Brand New and Thrice, and I was super impressed with this pedal. The only modification I made is switching out the Cut pot (A100K) with a linear pot (B100K). I think it gave me more...

Where do I begin. I built this up on June 16 and it worked like 20 minutes but then the LED would stop oscillating and just stay on. So then I confirmed every component was correct then resoldered all my joints, which required me to also scrap the dual gang pot. Luckily I always buy 3-4 of the...

Thank you!