Search results

Working on finishing up my Xenotron build and am at the point of measuring/installing the LDRs and LEDs. Given what is discussed here, should I just forego the water clear for LED 4 and go with a diffused instead?

Finished up the Duality/Binary build today and it is really cool pedal. Works great with the active Ray. Love the almost wave folding fuzz a la the prunes and custard. One fun thing I discovered by accident, if you run it off a dying battery (ab 7v in my case), you can get this intermittent...

Definite possibility. Was looking at the colossus or ungulate fuzz since both have the mids pot already integrated. I would omit the switch on the colossus and increase input/coupling/output caps to 220nf and remove the first stage diodes. Since my beloved Rhinosuar uses BC549c, I would just go...

Unsure of the diode config in a Bass Muff, just referencing the number of gain stages. I just did a litttle shoot out between the Dizzy Tone, Unpleasant Surprise, and my modified NYC Muff with diode lift and mids pot mod. All performed admirably. The US has a great square wave fuzz to it, so a...

But then it’s just a Bass Muff🤣. I did build the GPCB version and Barry did include a recovery stage, but I can’t recall it really adding anything. I’ll let you know ab the Dizzy Tone here in a minute, but keep in mind it is a 3 transistor circuit as well.

Well fuck. Welcome back and with a vengeance. Now if Fig makes an appearance I’m going to need to either buy a lotto ticket, or build a bunker

If you want weird fuzz, the prunes and custard plays pretty well with my ray. Does lose a little low end, but makes up for it in flavor. I was ab to ditch my Unpleasant Surprise in the meh, sell if I can pile. Need to give it a whirl on bass and bust out my Dizzy Tone too

Also need to add the Colorsound Bass Fuzz. I have a Stomp Underfoot Rhinosuar and it kills! can be built on any basic Muff board, just omit the first stage diodes and clipping cap, as well as, the recovery gain stage and beef up the input/output/coupling caps. GGG and GPCB both have boards for...

I play an SBMM Ray34 and have found good tones with the Brassmaster, MBP Gas Tank, PPCB Snuffy (prefer over the Aloysius), Shika fuzz, and the Obsidius (more drive than fuzz though). Working on a Aionfx Binary build. Will report back

Cuz Harry Klippton is back an killin it

My go to: 3m double stick.

Was looking for a more challenging build and since I have been predominantly ampless, was looking for a potential alternative to my Quilter superblock UK. So when AionFx dropped their sale more than a few months back (not the last one) I grabbed the L5. Had it not been for the digital BOM, this...

Good deal. Glad it worked out.

They connect to the same point so should be fine.

mine performs the same way and if you watch demos it is a similar behavior, but seems to be knob position dependent

I built the GGG Bronx Cheer not long ago and was wondering where the transformer had gone in this one. It is a fun little noise box though. You might need to build the real deal and give us a comparison 😉

F*ing cool pedal indeed even if it is fulltone. +1 on the Frost Drive it can be option paralysis, but anyone who I have built one for loves it. I typically build to sherbert (highest gain) specs

I was just thinking that a BB2 sized box is not as absurd as some of their enclosure requirements.

Nice build! I appreciate the color coded switch wiring. Now I want to build one, but why DEFX, why the giant board and enclosure for such a small circuit!?