Search results

I might try and do the same swap. I feel like it doesn't have quite the low end oomph I want it to. If you want it to compress a little less swap out 2 of the clipping diodes with 3mm red leds (not sure if size or color matter but that's what I used). Had modded my old rat to add LEDs as a...

Here is a handy chart for you! Also when ordering capacitors make sure you reference the circuit board you're ordering for. If the spot is circular with a positive and negative side, it's an electrolytic, if it's a rectangle you need a box film or ceramic.

Hey just for curiosity sake, are you trying to add bass or remove bass with this mod? I'm somewhat new to this and just trying to learn.

Edit: Nevermind, I was able to answer my own question. Definitely just need to jumper the led pads on the board Just ordered some led 3pdt footswitches and also some of the pedalpcb led footswitch breakout boards. These are the style with the led ring and 2 pins coming down from the top of the...

I ordered a single a1m dual pot from them as soon as the parts list was posted and still haven't seen it. Supposedly it's on the west coast now but still hasn't made it to me. I think dhl is shipping it so that's probably why it's taking forever. Banzai actually fulfilled the order pretty quick.

I might have an extra dual gang A1M once they get here.

One is a boost to drive the jfet harder I think, and the other is to change level and input impedance for use with a line level device like a synth. It's not just 4 levels of boost/cut. Boost jfet harder off/on Pad for line level off/on At least that's what it looks like in the original...

On the original parts list it says you can use a j201. All the 2sk208-y appeared to be sold out so the j201is what I'm going with. I don't know if it will change how it sounds or not but that's my only option right now

Does it go away when you use the low pass gate? I'm fairly certain most bucket brigade circuits have some hiss in them and usually I think they have a filter in the circuit to tame the hiss.

I ordered the a1m dual from banzai the day the parts list was posted, but I'm in the us and the package has been in limbo for quite some time. Ended up ordering one from smallbear just because I'll have all my other parts next week and I'm gettin antsy to get started haha

Just what I needed to know! Thank you!

Is that the right one? I'm not super experienced yet and don't know what all the different switches do haha, I just get the ones on the bom and put them in. Aren't the dip switches open in one position and connected in the other?

I was actually thinking about doing that also because I'll be using it with synth and guitar. Not sure what switches I'd need exactly tho. Off on?

Heads up, small bear as the dual gang a1m pots back in stock

Thanks! Black bled a little bit I'm happy enough with it!

Don't have an answer to your question but guitarpcb has the LM78L05 in stock

Lookin good! Just finished mine a few days ago also!

Those look great! Also thinking about building the simulcast for an always on low to medium gain thing. What power supply are you using for the 24v? I think my truetone cs6 only goes to 18v haha. Or is the 24v an internal thing?

Thank you! Golden high flow acrylics, orange is called Vat Orange and the black is carbon black. Airbrushed the whole thing orange and then dried, sprayed 1 layer of clear coat. Covered up the parts I wanted to stay orange with painters tape and then sprayed the rest black.

I also went with orange I originally ordered an orange enclosure from smallbear but once it got here I hated the color. So I ended up painting it a better orange and also added some black stripe things!