Search results

I guess it is pretty subjective. Most of the guitar pedal sound is. I will take a look at the gravitation and do some research. I was reading about fv1 buy tight to ask Thanks Pb

I am wondering whether i should build a reverb pedal like https://www.pedalpcb.com/product/pcb058/ Or just buy a used one like the ehx oceans 11. Or maybe there is a better option on pcb? My use case is simple hall/spring reverb since my amp doesn’t have it. My first instinct is to build it...

Yes i think you are right. I wasn’t sure about the led with pnp. It wasn’t in the original. Thanks Pb

Thanks for suggesting diptrace. It is pretty easy to use the basic features. Does this look correct? Pb

Thanks i will take a look Pb

Hi I am looking for software to draw schematics. What sw does pedal pcb use? Or is there one the forum members recommend? Thanks Pb

Ok great. I have it dialed in now. I backed off the tone a bit. I had it dimed but that was a bit boomy. It sounds great now. I am surprised how much it sounds like a Marshall Thanks Pb

This is my first try with ribbon cables on the m800. I will definitely try the larger ones you suggest next time. That one looks really easy to work with. So far the m800 is ok😁 Pb

Note. I am not being critical consider this as feedback from a new builder. My thought was there will be mistakes. Often the outboard wiring is the problem. How could it be easier. The pathogen was my first board. Absolutely my soldering could have been better on my build. Here is what i...

This is just feedback based on the last few boards i built. Off board wiring is where most of our problems happen. Is it possible to design the the pcbs with a bit more room for the 4 off board wiring holes: + - gnd grd I find they are very tight at the top. Also if (when) they break off...

They definitely sounds better. I had to rebias all the trims again. I am hoping they stabilize. Thanks Pb

Ok thanks. I will dime it and try it. Pb

I tested the m800 without the case. Pass thru works. I have the trimmers at 4.6 except #6. I noticed it sounds more like fuzz. It is late. i will check the bias again tomorrow. Pb

I have the board all together and am biasing the j201s. I noticed that the bottom right trimmer is cranked down all the way and i am still seeing 8.6v. The others are all 4.6ish. Is this guy not meant to go to 4.6? Thanks Pb

Thanks for the quick answer! Soldering iron is hot 😁 Pb

I am building an m800 tonight. Noticed the trimmers have 5 holes. Assuming they are for larger trimmers as well? I am using 3326 which fit the upper 3 holes. See attached. I note that the doc only has 3. Thought i would ask to confirm. Thanks Pb

Nice. What does the buffer do on a fuzz? They usually don’t play nicely. Or is that an unbuffer? Edit. I looked up the okko grit. That is an unbuffer. I was researching this today😁 Nice. I am interested Pb

Yes. I think that would give us options. Thanks Pb

There is another discussion from a few years ago here on this: https://forum.pedalpcb.com/threads/jack-ormans-pickup-simulator-anti-buffer.3734/#post-231797

I agree. I am looking at the proteus version for comparision. thanks Pb