Search results

Sad they don't have this type, but awesome explanation. I'll just pad this order with an enclosure for the Mesmerizer. Todd D.

For some reason I didn't order the C100K Dual pot from tayda so I thought to get to their $5.00 minimum order I would try a predrilled enclosure. All the 5 hole predrilled enclosures I see at tayda when searching "appear to be wrong for the Photon Vibe. They have the led on the top and a knob...

The Van Pelt Drive isn't weird and may be close to a 1 trick pony (I think with the 3 channel EQ it's not, but others may disagree), but it is the pedal I use the most. I use it every week. I also think the DMD-2 is very useful and sounds awesome. The UniCab is also "boring," but since I am...

I biased mine by feeding it with a 1k 1v peak to peak sine wave and adjusting the trim pots until I thought the signal looked "pretty" on my oscilloscope at the associated jfet. I am sure there is a better way.

The old build docs have a mix of B50k and B100k. The new silkscreen has all B50k. Is the new silkscreen correct?

Any new status on super faceplate? Looks kind of plain just white.

If you don't have 5 MPF4393 laying around, you may want to look for some before you order Bohemia so you can add some of the SOT23 adapters to your order. The ones I found were over $5 a piece. Mouser has the SOT-23 ones for less than $1.

Thanks! They also had the Silonex LDR, Lamp, and some of the other transistors Tayda doesn't stock for some of the other boards I have going.

I ordered one from Mouser. It was backordered a couple of weeks. I just checked this morning and now it says 16-Sep-19. I guess I need to find some where else to get one and come September or so I'll have a spare.

Are you talking about A-4191? These are out of stock until June 16 so I will have to wait to see about these. Either you bought a lot of them or other people like them as well :)

It is a softer click so mechanically they are quieter. It is a different feel as well (you may like this or not). They are heavier and feel more solid when you hold them in your hand. I don't know if the resin (epoxy?) holding the pins is nicer or it the switch contacts are nicer or not. I think...

I like the way you alternate which side of the resistor is near the board. Should make shorting the exposed leads less likely.

I just noticed that the 3PDT footswitch from lovemyswitches is $0.20 cheaper than tayda. I have used one of lovemyswitches "super premium" switches and it is definitely nicer, but also definitely more expensive than I want to pay. Has anyone compared their $2.30 footswitch to the $2.49...

Does anyone have the parts list for the new woodpecker? I have one on order, but it hasn't come in yet. I am trying to get my tayda order in. The picture of the silkscreen online has the component reference numbers, not the component values. Thanks!

It looks like several hot air rework stations are available from Amazon for less than $100. Has anyone here had good or bad experiences with any of these. I am thinking of getting one.

I got mine from adafruit because you were out and I was buying the tssop converter from them as well. They were listed as T18 in the description. I thought that was 6mm. That's not what they are. I wonder what luck I would have cutting these off the board. It looks like yours are back in stock.

Do you have knobs for the rotary switches yet? I bought eclipse knobs from lovemyswitches and got the knurled version for the switches. The knobs are made for 6mm and the switches are 4.5. They don't really work well. Did you use a knob with a set-screw?

I have some of each of the three colors in my shopping cart for my next tayda order. For the 125B boxes, I use the template from here off the Tools page. It really makes the drilling work quicker.

I really like the white caps on the toggle switches. Where did you get those? I am using a drill press and a multi-bit. I think maybe my printer shrank the template a little. Maybe there should be one dimension given for the template that can be measured. It doesn't actually have to be on the...

Awesome!