Search results

Sure I will try to add more detailed photos but it looks exactly like this which I found rapidly from the internet:

Thanks a lot for the fast response. In my Prince of Tone which is the latest iteration, when I check it, I think it is not same as Pauper schematic. There are totally 8 diodes 4 x MA858s and 2 different pair of other diodes as a first and rapidly check. And also I see C3 as 100p and C1 as 22n.

Hello, I am checking Pauper documentation thus schematic and pcb photo, for the distortion part I expect to see 1S1588s for hard clipping but there are only 4 MA856s as clipping diodes. Am I missing something? By the way I just received my Prince of Tone and I read C3 as 100p and C1 as 22n.

Hello again, I am checking Pauper schematic, for the distortion part I expect to see 1S1588s for hard clipping but there are only 4 MA856s as clipping diodes. Am I missing something?

What about R3 value between the Pauper and Paragon schematics? It is 10K for Pauper and 1K for Paragon as low gain.

Indeed, this is the origin of my question which I try to figure out what are the differences...

In the schematics, I expected to have same component values as prince of tone suppose to be half of king of tone that's why I am confused. Pauper has 10n for c1 and 10k for r3 but on the other hand Paragon has 22n for c1 and 1k for r3 when we are talking about low gain mod.

Hello, is there any reason to use different C1 and R3 values in Pauper and Paragon schematics? Do I need to use both 22n for C1 and 1K for R3 for low gain both pedals?

Hello all, I have some questions about Paragon schematic and components as I am new and deep dive on King of Tone universe:) I am sorry if my questions have already discussed. Probably some values are changed in time as improvement or when people share their own tracing but here they are: Why...

Hello, is anyone can tell are there any schematic differences between Tommy and Timmy V3? Cheers

Hello @Chuck D. Bones, have you figured out the target drain voltages per each trimpots? I saw one of your comment said that toggle up is for tight and down is for Big, is it correct? Cheers

Thank you very much for your time and the diagram! Should I use the jack like below as switched tip? Only middle jacks have to be switched tip in this case right?

Hello all, I have question about how to separate the channels for a combo pedal such as king of tone. I can add 4 jacks to connect each channel's inputs and outputs separately but I couldn't figure out how to wire the jacks to accept 1 input and 1 output as normal way. Any idea? Thanks in advance

Hello all, I just did the Keeley Phat mod to Cobalt Drive. I used 33nf as C14 and use spdt switch to add 68nf in parallel. Frankly I couldn't hear really the differences on the bass frequence. Am I doing something wrong?

I found the problem. Somehow SW cable on the 3pdt board shorted under it. Thanks for helping me out! Cheers

I checked again with clear mind. There is no sound when the pedal is off. And also Led is always on but when pedal engaged led's light is brighter. Could you please share the voltage value for the IC? I am open for all the ideas to diagnose it. VREF: 4.88V IC Voltage read: 1: 4.88v 2: 5.12v 3...

I didn't solder the led as I have an issue. I have already isolated back of the pots.

Sorry about that. Here are the photos.

Hello all, I am building Tommy III using 3pdt board. The problem is 3pdt switch works well to turn off and on the pedal but led is always on. Tried to find the problem but couldn't have any clue. Could it be the 3pdt switch? Could you please help me to solve it? Thanks in advance.