Search results

That is a very, very sexy looking Strat!

Not to mention they are cool guys @StompBoxParts !

It sure is! (Had to take the cover off to make it fit :ROFLMAO: )

It shouldn't be too much harder than a 5F1. Check this out to see what it would involve. Here is mine (I made my own layout, didn't see Steve's until after I made mine):

Looks great! I'm going to have to reflash my chip to try the momentary mode, thanks for posting that!

I would assume you could either use a 1uF Electrolytic cap (using the + pad in a vertical orientation), or a 1uf Film cap (using the pads in the horizontal orientation).

Yep, that is totally doable. With the PPCB 3PDT breakout board, take the Fuzz Jack In, wire the rest as normal, then Fuzz Jack Out to Boost Jack In, then wire the rest as normal. On the Order switch, Fuzz Jack In will be S1 and Boost Jack Out will be R1 (the Vibe will go on S2 and R2). Then...

That should be doable. From what you described you want to think of it as two circuits: 1) Vibe and 2) Fuzz & Boost. You would want to keep the Fuzz and Boost wired in series. From there, you can implement any normal order switching (like the PPCB order switching board).

I kept listening to the clean and shallow demo on repeat! Great sounding trem!

It looks to me like its built on Madbean's first Current Lover board (looking in the archives, from back in 2011!)

StompboxParts is your hookup! https://stompboxparts.com/faders-slide-pots/30mm-slide-potentiometer/

Looks great!

Here are my next 2 all-in-one boxes that I finished up lately... The first is the Electric Funeral. This is to cop some sounds that you would hear Tony Iommi making on some Black Sabbath albums. The chain starts with a Parapedal Wah circuit (acting as a fixed wah filter), then into a...

Damn that's pretty! And you are right, it looks 100% better than the PRS tele!

Shoot me a message, I can hook you up with a board!

It did! The Siete Santos

Here is another 1590DD box that I've been working on for a while. This is the Atomic Punk, based on EVH's Van Halen 1 era pedal setup. The signal chain is a MXR Flanger into a Phase 90, then into an Echo-plex style delay with preamp, then a 6-band EQ and finally a Marshall Amp. I'm really...

So with all the Cornish hate going on, I wanted to finish up this multi I had kicking around for a while. In a fit of "whats something dumb I could do?", I decided that it could be kinda fun to make a multi-effect with only Cornish pedals in it... so here it is! I call it The General! First...