Search results

Oh I think you are right. I’m getting confused as they aren’t labeled. Yes, I damaged the pad on mix 1. So I jumped between those two points. I wish I understood the part of the schematic that controls repeats. Deep blue delay was easy. Just one 22nf cap went from one repeat to full function.

Hey guys. This has been a rough build. My first mistake was rushing and assuming. I though all the 1u capacitors were actually 1nf box caps. It just didn’t register that it wound be 1uf ceramic. The space allowed looked perfect for 1nf film caps….. not a 1uf. So I used all 1nf box caps…….. shit...

Late reply, but thanks! I ended up going the “clean headroom when using it as a normal delay” route. But I’ll be experimenting with the other option next. You helped me a lot. Cheers

Ahaaa!! Now I get it :)

No worries! I appreciate the help. One thing I don’t get is the 22nf isn’t in the circuit due to the pads being lifted. The capacitor looks like it’s there but is doing nothing. So I don’t get how this is introducing it into the circuit? I probably didn’t explain this very well. Thanks for the...

Wait. Maybe you mean the pad of the potentiometer? I’m confused haha.

Thanks man. I’m sorta dumb when it comes to visualizing. So basically a wire going from one side of the resistor to repeats pad? Thing is there isn’t really repeats pad because I fried them….

Hey guys. I build this seabed delay with a momentary oscillation stomp. I loved it but had a couple problems. I had to replace the 50kB repeats potentiometer. While doing this I burned the 22nf capacitor a bit. So I wanted to replace it. For some reason I just couldn’t not de solder it easily...

Thanks. Yes I’ve heard this, but never had it laid out like that article. That’s helpful. I’ve noticed a few builds that tend to use red led’s at the input of the PT. I assumed that’s what was going on but wasn’t sure…. Is there a simple way to add this as a mod to my momentary oscillation...

Exactly. You could use 1 alligator clip to connect the points together, or 2 alligator clips to connect them across a momentary switch. If you like the result, replace the alligator clips with wires. Ok, so life got in the way unfortunately. But I have built the circuit now and it sounds...

Awesome! Thanks broski! I’m new here and honestly surprised of the quality help and specific info so fast! Something came up and I had to put the circuit down for the day about 3/4 through populating :( I’ll throw it together later tonite or tomorrow night and let you know how things are going...

With this noise ensemble build from way back. It seemed obvious to me to connect row 2 and three to combine input and output to oscillate. Don’t know why this is different haha.

Well I’m building it right now. Should be done the circuit in about an hour. I can test that. If that works. I guess I could just throw the momentary switch in between?

Wow thanks man. I know the circuit is capable of reaching oscillation stock. Unfortunately I can’t visualize how I would physically connect these. I’ve been “painting my numbers” successfully for so long what seems obvious to all you guys unfortunately isn’t to me yet. I’ve done something...

Hey guys. I hope somebody can help me visualize the wiring for this. I know basically the input and output are wired to a momentary stomp (with some type of resistor in series to tame oscillation a bit) ….. when switched on they combine to create infinite feedback. I’m having a hard time...

Thanks for the resource. I confirmed every component to be correct. Reflowed everything …… cleaned etc etc to no avail. I started fresh with a new pcb and all is well. Sounds like it should (fantastic.) I actually haven’t had many failures so my troubleshooting abilities aren’t the greatest. So...

Ok so I found that I had a 2.2k in R18 instead of 2.2M. But the pedal is still just barely at unity. Maybe that’s normal?

Hey guys. I really suck at identifying resistors by stripe still. I’m having trouble where when my volume is maxed it’s still just below unity gain. Everything else sounds good to me. Can anyone help??

Thank you sir.

Yeah I have the wiring in front of me. I just like using the breakout board. Gives a nice tidy look. Wasn’t sure if it could work with this one. I’ve actually never built anything with buffered bypass. Thanks man!