Search results

Makes me wanna actually do some artwork again instead of temp label maker! Thank you @chongmagic !

My waffle doesn't sound like that...interesting.

Use the carbon mic part if you want the true lofi. I’ve got a schematic on here somewhere for a simple way to hook up a phone to xlr.

57s and 58s will be used long after we’re gone. They’ll be fine. If you get a budget, ribbon mics for the cabs will be a level up later on. I’d go with the ssl12 over the m4 as it’s actually 4 inputs out of the box and it can expand if needed later but works great right now. As I said you’ll...

No need to be scared at all! Nathan makes it super easy. Let me know and I can cruise up to help ya!

I would advise getting as many inputs as you have instrument / sources you're planning to record, plus some because you'll always want more. Cable swapping kills creativity IMO. I had the MOTU M4 for several years and it was rock solid with low latency when not using the direct monitor feature...

Detailed pictures of both sides of the board helps immensely when asking for help troubleshooting. I use it with single coils and it's a creamy lead / chunky rhythm all day long.

no gut shot? no deets on the mods? ...then it didn't happen :ROFLMAO:

Love My Switches

What mods are those switches up top?

Nate, I just finished building the wrecking ball and WOWSERS it’s good! I did have a couple of notes. First, the 4u7 25V cap from the build doc doesn’t seem to be needed as there isn’t a place for it on the board. Secondly, I used your artwork file (thank you for supplying) and Tayda sent me an...

Pads 5-9

Some of those solder connections look cold or dry. Here is a graphic to show the foot switch wiring off board, maybe it'll help with tracing. Post in thread 'Paragon footswitch brute trace lifting' https://forum.pedalpcb.com/threads/paragon-footswitch-brute-trace-lifting.16480/post-191843 I'm...

Clean as a whistle! Well done!

I would try it with the 12v output. It says it's good for 50 watts. Worth a shot, you can always return it if it doesn't work.

Correct

Works fine in my experience. i've got two in serial in the FX loop of a Deluxe 85.

Yes I did see that. PPCB forum wasn't able to load for a few hours.

100-150mV @ 1kHz is what I use.

According to your diagram, #2, #3 and #6 all need to be connected. I only see #3 and #6 connecting