Search results

  1. moonlightpedalbuilds

    Am I the only loser who keeps trying to time orders with the coupon codes?

    For me discount is just to cover shipping expenses all the way to Philippines.
  2. moonlightpedalbuilds

    Could faulty 3PDT switch cause a short?

    I never had problems with 3pdt both cheap, tayda and loveswitches with grounding. I had a problem with tayda 3pdt’s that do not latch. Are you using solid or stranded wires? A single wire from the stranded can mess up your pedal. Check both sides of the 3pdt breakout board. If you think 3pdt...
  3. moonlightpedalbuilds

    Magnetron Delay Problem

    Try checking the continuity of the IC legs to the underside of the pcb where the sockets are soldered. Those kind of sockets are less reliable than the rounded hole type. Any bend on the pcb(when being mounted) may affect the connection of the IC to socket.
  4. moonlightpedalbuilds

    Magnetron Delay Problem

    From previous experience when dealing with stranded wire, I single strand of wire may touch other parts. Especially when try to insert stranded wires into the holes in the pcb, potentiometers and switches. What I do is to make sure they at tinned before inserting them into holes. Another thing...
  5. moonlightpedalbuilds

    Magnetron Delay Problem

    Are you using stranded or solid wire? Gauge?
  6. moonlightpedalbuilds

    Super 64

    Yes, on the biasing voltage of 9v.
  7. moonlightpedalbuilds

    Actual Overdrive Jr

    Are the Actual OD Jr. and Maxon/Ibanez SD-9 the same?
  8. moonlightpedalbuilds

    Actual Overdrive Jr?

    Can anyone confirm if this is their version of the Ibanez/Maxon SD-9(m)?
  9. moonlightpedalbuilds

    Aion Hydra (Naga Viper)

    Replaced my Varioboost
  10. moonlightpedalbuilds

    Aion Hydra (Naga Viper)

    here’s my viper from rully. Made 5 of these cased in 1590a. I used both plastic pn2222 and 2n2222.
  11. moonlightpedalbuilds

    Unicab - How do I remove the gain or put a switch to bypass gain?

    after
  12. moonlightpedalbuilds

    Magnetron

    Just a center punch, drill, step drill bit, drill guide and a steady hand. I made a template for all PedalPCB 125b knob configurations. No tick on this one. My Dark Rift did and made the modification you recommended. PT2399s from Tayda. No issues on distortion.
  13. moonlightpedalbuilds

    Tyrian (old version)

    120 pedals experience. PedalPCB has the smallest resistor pads compared to Aion and rullywow. Lead doesn’t go through the other side easily or some times doesn’t stick to the pads. Maybe my soldering lead is not good enough but I got used to it. I clean the flux dirt with a hard toothbrush and...
  14. moonlightpedalbuilds

    Tyrian (old version)

    just another Tyrian
  15. moonlightpedalbuilds

    Magnetron

    Lifted the internal gain Nice sounding delay
  16. moonlightpedalbuilds

    Unicab - How do I remove the gain or put a switch to bypass gain?

    Glad to hear this is working for you. Not for me. It does not agree with my board. Switching back to my DIY bbe sonic stomp. Thanks for the replies
  17. moonlightpedalbuilds

    Unicab - How do I remove the gain or put a switch to bypass gain?

    It takes away the grit from overdrives, distortions and fuzzes.
  18. moonlightpedalbuilds

    Unicab - How do I remove the gain or put a switch to bypass gain?

    Gain seems to be interfering with my other dirt pedals. It simply sucks the life out of them. How can I bypass this section of the circuit? is it possible?
  19. moonlightpedalbuilds

    MDMA Od at 18V?

    I only have 9v output on my power supply.
  20. moonlightpedalbuilds

    MDMA Od at 18V?

    Can this https://www.pedalpcb.com/product/3pdt-chargepump/ work on this pcb?
Back
Top