Search results

I used a jumper from pin 2 for the SIL BA662 to pin 2 of the AS662. The other jumper was from a ground to pin 5 on the AS662. I used the ground from the capacitor on the lower right hand side. Since it was a box cap, I looped under the board. There are other choices for the ground - just use...

I used the alfa AS662 instead of a BA662. I needed a couple of jumpers but it works great. Thanks to Guardian of the Analog for gifting me the board. Thanks to Szukalski for the layout. It's a fun compressor.

I have the same problem with the presence and the tone. Maybe a W20 would work for the tone, as well (the C25K sound like a good option, as well). I think the C10K for the presence is a great suggestion, will try it on my next Kudzu. I'm not much of Dumble guy, but I really like this pedal.

Do you have pictures of the boards?

Replace R7 with something like this.

Are you going to design your own pcb? Or are you going to try and hack it onto the Angry Andy pcb? I have an idea that would probably work and not need another gain stage. I'll try and draw it up when I get some time (tonight or tomorrow).

You could do it the same way same way the Suhr Riot Reloaded (Disarray Distortion) added more gain. The Angry Andy and the Suhr Riot are, basically, Crunch Boxes. Just lower the R7 resistor to raise the gain. The Riot changed the 10K resistor to 6k81. If you want lower gain, just raise the...

Ordered a couple, as well.

Yup.

I built all three. I'll pull them out and give them another whirl. I remember liking all three but I never compared them.

I own the Hakko 808. Apparently, the FR-301 heats up faster. I love mine. I can desolder stuff that I couldn't, otherwise.

The super Stevie has two diodes in series for the clippers while the luxury 763 only has one. The super Stevie will have more headroom while the luxury 763 will clip sooner. There's a couple other minor differences. Except in the extreme setting, they sound very close. Just turn down the...

I've given several pedals away and then rebuilt them. Usually, they sound the same. However, there's been a couple that don't quite sound as good as the ones I gave away.

I got a bunch of those from my headphone amplifier days. Thanks.

What power jacks are you using? The power supply I have is rated at 24 volts and 3 amps.

Sounds like there are a lot of us in the same boat. I think I just need to finish wiring mine up. Hopefully, I didn't repurpose any of the jacks.

I, also, highly recommend Chuck Bones mods.

Here's a direct link: Grind Customs Docs Both are great pedals. There's an updated spreadsheet for the ultra stoner with a bunch of Big Muff variants. Found it. Here it is: Muff build stuff.