Search results

No rush, but good to hear

@Robert are we likely to see 4301 modules in the new year or should I look to buying a pre-built noise gate?

I built mine with like 95% of Chuck's mods, and it booted up first time and sounds great.

Probably but I just got one in the mail today haha

I have a rev3 board, Looking at this 1590BB2 size - https://drill.taydakits.com/box-designs/new?public_key=aDc0c2lJbWJSYVRFcDNaSW1rbW5yUT09Cg== I measure the inner pots at 15mm from centre, and 29mm past that for the outer pots, putting the Y position for the switch at -29mm. I measure the...

Hell yeh

I raise that while that is true, I dont want any ugly boss pedals on my board, and I want top jacks. I would love to see MT-2, OD-3 & DS-1 direct PCB from PedalPCB.

The Abyss Isosceles Both pretty trouble free. Abyss has something modded, I forget Isosceles changed 220k to 330k for more level.

Which I'm definitely not doing... headphones or quiet room amp. so again, likely part of my problem.

Unexpectedly got a chance to get to a store for a quick demo today - tried a Warden with a squier tele and a clean amp, I reckon the settings you'd given - RATIO full up SUSTAIN at 5 (noon) TONE at zero ATTACK at 3 (10:00) RELEASE at 3 (10:00) LEVEL at noon Sounded pretty much exactly how my...

Can you link me to this? If it is I'd like to have Tayda replace or refund it.

I was using a Squier tele with stock pickups, into a pod express on the Fender Princess amp. I changed over to my Ibanez 8 with Fishman fluency, into the 5150 amp model. Now I'm going to have to check the 2134 in my Sherwood too lol.

Ok I just did some further testing, actually used my death metal machine for some high gain tapping, and I can hear a slight difference in the ratio between 12 and 5pm...like, I don't think it's much but I do actually think it's there.

1. I haven't owned a proper compressor. I do have the HX One, but don't think it has a model of an optical compressor, so likely a moot point. I can try to get to a store at some point. 2.I think the ratio pot should be fine, I did measure it to about 92K when all the way off, and about 1ohm...

I'll get back to you with how I go. I guess what I wanted from my above testing was that the ratio pot is definitely doing something, and same with the LDR.

I had not read Chuck's reply before posting...I will test that and report back. I am fully prepared that this is something I've stuffed up, but would like to learn from this. Most of my other pedals have gone fairly easily.

I've just pulled the pedal over while I test, I can see the led lighting with my play. I noted that the single note thing I was testing with didn't make much led spike (I know it's a lot less led that I can see) but I played some harder power chords so it was more obvious that the led was...

Its likely from tayda yes - I may have a different one in my sherwood, i can try that out or a tl072

I got a new PCB, new components, built it up and I swear the ratio is still not doing shit.

FWIW, I used MLCC and it seems to be running fine - considering the extensive mods I did on this one I was sure it wouldnt fire right up but it did! Thanks Chuck.