Search results

Very elegant! :)

Probably MMBF5457. DM sent.

Clean your wiring. IN/OUT wires as short as possible, same with the 3pdt wiring. You can try shielded IN/OUT cables. Also - keep the wires of the one circuit away from another circuit.

"Sorry, this item's currently unavailable in your location"

Some time ago acutators were available on aliexpress, but they evaporated. And so far no offers, I check regularly.

and what? is it cool?

GT402 B/G GT404 B/G MP42B GT402/404 - warning - large package size

Arachnid (8 programs) or Pythagoras (3 programs). Also eeprom programmer and then you can use available FV-1 programs or buy pre-programmed eeproms

Yep, it's correct. But there are different adapter boards available. For example: Remove Q2 + Q3 and measure the voltages. Then maybe remove Q1 and Q3 and do the same. I've already verified resistors (visually, from the photo) - nothing suspicious. Also - make sure there's Vcc voltage...

Hm.. I think a photo will be needed after all - show a close-up of the transistor adapter boards. It can be a board without a transistor, it's about the pinout.

C10 is optional, should not affect normal operation. Is it the same when you desolder the LED? or desolder IN/OUT/GND/SW wires from main pcb?

I know that picture is worth thousand words but here we prefer measurements.. Time to measure some voltages. Take the multimeter, set to DC Voltage, then - black probe to GND, red to marked points.

Cnc...? Using "regular" metal stamps is possible for single letters, or for punching out letters one after another. If you put several stamps together to form a word, the space between the letters is quite large. You can probably order custom stamps with whole words, but I have no idea how much...

Make sure R16 is 33k. Should be orange-orange-black-red, but to me it looks like orange-orange-black-brown which is 3k3.

So now you can: - inspect the pcb.. is there any missing solder joint? Or maybe cold solder joint? - resolder those two solder joints - if above fails - you can solder some wire bridge between pin 6 and R17.

Make sure you have a continuity between pin 6 of the IC1.2 and R17. Same with R17 and pin 1 of the Gain pot. Then Pin2 of the pot and IC1.2 out.

Not strictly pedal related, but definitely helpful info.

I had a similar feeling for a moment. These photos are very sterile. Zero imperfections.

In my opinion, it's more like acrylic/plexiglass with a brushed top layer, 1.0-1.5mm thick. This one looks like screen printed. A bit different angle of the Antique V3.

I have a limited experience with UV printing but the edges of the pattern and letters are so sharp and crisp. Is this possible with stacked layers of the ink? Same with the letters - except that they also feel like they are embossed. But maybe this slight convexity of the letters is due to...