Search results

Thanks for responding. I do want to use one TRS jack to control two relays. I think the relay modules I’m using are not the right solution. I need the remote switches to “own” the state. The switches are MIDI-controlled, so I don’t want to create a mismatch where the controller shows it’s ON...

I think my build is working the way it is supposed to, so I didn't post in troubleshooting. I'm building a 2-channel loop switcher that is intended to be controlled by 2 switches connected via a TRS cable. I think I made several assumptions that were incorrect. My real question is: What would...

The Volume and Intensity are kept in there original positions, and then I mounted the Speed pot in-between them and ran wire.

Thank you! Yeah, it seems like it gets dark fully CCW, and anything CW from that is full range.

Hey, that looks like a pedal a grown up would use! But really, still super fresh without the UV.

I love that artwork.

This one was mostly finished for a while. All the recent Phase 90/45 build reports inspired me to wrap this one up. I’m not normally a black & gold person, but every once in a while it just feels right for a build. I picked up a matched set of transistors from AionFX long before I had a board...

If you have a bad build that you’re sick of looking at or working on, just toss it in a box. There will come a day you where identifying and plucking parts off will seem trivial. Like your own salvage yard.

That is a super-kind offer. But I already have tested germs for a fuzz face, as part of a prize from the Player Hater’s Ball. Just haven’t gotten to it yet.

I wasn’t planning to write a report for this, but I didn’t find another report for this circuit. I’ll quote the product page for an overview: I appreciate designs the use common, inexpensive parts as an alternative to the “mojo”. I think this is a good beginner circuit, even with the three...

Not specifically. It’s more like “remove controls that never get used or feel useless for my purposes”. For example, I removed the THRESHOLD on my Ugly Face because I always keep it fully CCW.

This is my third build of the circuit. My first was built to n00b construction specs, the 2nd as exercise in point-to-point, and this one is customized to fit into the design language I’m developing on my pedalboard. The TONE knob felt useless to be, so I ditched it. I felt sure that I didn’t...

Thanks! With the gain cranked, I get to unity around 2-3 o’clock on the volume. With the gain at noon, it get to unity with the volume cranked.

The dirt expedition continues… I didn’t dive into tweaks and mods. The only difference from the BOM is a C500 for gain. I’m trying to make the insides cleaner on my builds. Getting the wires close to the board went ok. When I get low on my current supply of solder, I’m planning on getting some...

I don’t know about one baked in, but I remember reading a build report with an FX loop mod. That would be nice to have a pcb with fx loop pads. https://forum.pedalpcb.com/threads/yaad-madbean-anamorph-w-tweaks.27523/

It’s a fun pedal, but not well suited for traditional use of reverb on guitar. To your point, there can be some good times with gatey/PLL/Synth tones.

The Skoolie (DMM in a 125B) is back in stock: https://www.madbeanpedals.com/forum/index.php?topic=35682.0

Assuming it’s the same as the other PPCB faceplates, I think you want this duder: (edit: this is not it) https://www.taydaelectronics.com/3mm-led-lampshade-protector-clear.html There’s also other colors besides clear in that size.

Here’s what I would like to do with mine. Concentric controls for the two muffs. I’ve seen some B100K concentric pots, 9mm with solder pads. $15-20 each, ouch. The dream would be to have concentric pots that matched the dual gang pcb mount. I’m guessing those would be custom pots.

Yep, digging up an old thread. I have the Moonn clone of this and I love the chaos I can get from it. I was just wondering if anyone knew of a similar circuit that had less controls.