Search results

I've got a Magnetron that I put together a while ago that didn't work until recently. I don't know if this is part of the circuit but with the Gain trimpot all the way down I'm above unity gain a decent amount and with it above a 1/4 turn it gets into boosted level territory.

I have dived into a rabbit hole concerning wahs. I have an Ernie Ball wah that sounds a bit better than stock after some mods, I did a couple mods to my lead guitarist's Joe Bonamassa wah, and my vocalist has a GCB-95 from 1992 that he wants me to spruce up. I decided to get a Sham Wah board...

I have been on a kick recently to make my Ernie Ball Wah work better with bass, including downtunings. Here is what I have compiled so far. I made quite a few changes. The rotary, pots, and toggle are mounted on the left wall of the enclosure. You will have to remove the back plate that...

Part of my Celsius + Cepheid combo build, looking to get some feedback before I reach the point of no return. I essentially ported over the dry out function and the EQ section from the CH1 because I liked what the EQ pot does. The Buffer Inverter is the PPCB board.

Not a complicated build but something I'm proud of. Left to Right: Ultra/Crunch Channel Select. Clean Channel Bypass. Effects Bypass. A/B Loop Selector. Left to Right, Top to Bottom: VOut. Out. Send A. Send B. VIn. In. Return A. Return B. DIN7 In. Channel A. Channel B. All...

I'm going to be building a highly modified Celsius + Cepheid combo build. One of those mods is a master volume on the Celsius preamp before going into the chorus, I read that someone just put an A500K at the end of the output buffer after R11. It seems a bit high, A100K sounds more reasonable...

I have read somewhere on this forum that I can add an SPDT Toggle switch to the Intelligent Relay Bypass Module to have Momentary and Latching options without using the mode change function. My goal is to essentially build a custom 2 button foot switch for a bandmate that functions like a boss...