Search results

There is quite a bit going on in there

The knobs and boxing

The process

For this build I decided on Taiway short bat switches with black switch covers, anodized black knobs, a red led, and a pink enclosure. When I think of Chorus I think blue, overdrive green, phaser orange, flanger yellow, delay pink. I love using the PedalPCB faceplates on the pedal top and for...

I had no idea that each EEPROM had to be programmed to a certain effect. I ordered about five different boards that require these in doubles, and then I took all those chips and put them all together in a little container. The more you know They all carry the same part number, and they carry...

Thanks! I did the continuity test between points I could see on the pcb and they all worked.

I’m going for it

It looks like hieroglyphics to me. I’ll do my best to decipher. Thanks for the link.

Hey, that’s a great idea. If Robert solders all the hydros then yes it’s from him. I can compare notes.

Building a Hydra. One board was soldered by pedal PCB. This board was soldered by me. I’m wondering if there’s a way to test it since this is my first one. Like before I populate the rest of this board.

Mid century modern circa 1959

Trippy and cool in a steampunk sort of way.

I would send it to you to see how easily you can identify a problem. I was going to grab another one but I checked earlier... these are sold out.

So I just took my time and redid all of the solder concentrating on pots as well. Maddening I put it on the platform and it just pops every time you engage the switch, but nothing I usually purchase two of every board because I screw up the first one, but I only got one of this one - and for...

Thanks. I took a break from it to experience some success with my Maximum OD build

I didn’t realize it, but I put this thing in a glow in the dark Tayda enclosure

Well, I boxed it today. Sensational pedal. If you flip that switch north, you are in for some compressed sustaining type distortion. Click it down and you have somewhat of a tube screamer. All in all I really like the build and I like the pedal. Thanks to Robert for finding a bad resistor that...

Thanks much. It looks like the sockets and chips are OK. I just used my meter to check everything else on the board and everything seems to be where it should and all seems to have the correct readings. I’ve actually checked every resistor to make sure I didn’t put one in the wrong spot. It’s a...

Oh boy, I’m such a spaz my numbering was off. Thanks. So the lower socket has continuity between 1 and 2 and 13 and 14. The upper has continuity between 1 and 2, 6 and 7, 8 and 9, 13 and 14. Edit: I put it back on the platform. Still a loud pop every time I flip the switch. Nothing going on...

All right, I removed the IC and tested the socket. There is no continuity between pins 13 and 14 in the socket. Here is a picture of the solder on the back.