Search results

I found some on Ebay using the search term "axial multilayer ceramic capacitor".

They are axial (usually ceramic) capacitors designed to be installed by pick-and-place machines. Any capacitor type should sub fine there.

They appear to be pretty standard silicon diodes. And both of those are very trusted vendors. You could sub 1n4148 for them and get the same results a lot cheaper. You can use your DMM to check that they are functioning diodes.

Imagining is not science! I’ll try again…. Was your pcb labeled with buffered bypass pads or true? How did you wire the foot switch? Both types have different wiring schemes. Pictures are a basic requirement for troubleshooting. The charge pump and those pads are not a concern (yet)

If it’s a true bypass effect and you have no bypass, that has nothing to do with the PCB. That’s going to be wiring or your foot switch.

Is it possible your polarity protection diode is dropping the voltage? Bad/wrong part? I’d start there.

The switch works either way you install it.

It was tossed out by Gener at this show: An outdoor daytime show at the bird amphitheater at the zoo a few days before my 21st birthday.

Hey @Bricksnbeatles, check out what I found in an old shoe box!!!

Agreed. I built it with a vtl5c9 and with a tayda LDR with a yellow led and the both behave the same. Save your money on that part.

That’s not how it works. It’s not how ANY of this works….

Tayda has eliminated the cheap option for tiny orders, but once you add some weight to an order the shipping comes down. I recently got $4.99 DHL from Tayda on a $100 order with enclosures.

I guess it depends on what you are using it for.

Hey @snouse I've seen your guts. I can teach you how to remove unsightly flux from your builds for a professional look. "So clean inside ya can lick it! " :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: OK! And remember "military grade" means it came from the lowest bidder on that contract!

https://www.pedalpcb.com/product/6-2-3/ https://www.pedalpcb.com/product/mmbf5457/ The sky is falling!!!

I can tell who has a shitty car that they wash regularly, but the inside is like an ashtray let loose with an infant in a dumpster. The thing that boggles me are the ones with beautifully layed out and executed artwork, but they execute the guts like an ashtray that let a toddler loose with a...

You should be fine with the 18nf.

I think that’s a typo on their site. If you look they have their 16 pin socket listed as “18 pin” Edit: see next post.

You’ll still have to clean up after.