Search results

I took inspiration and schemes from the works done on the forum, having 23 effects in such a small format is really nice, then creating your own algorithms and using them live is priceless.

SOLVED pin 28 of the fv1 needed reflow! :LOL: the probe was essential forthis! thanks all folks!

i have the mod sound on pin 28 of the fv1 and the ctrl pot 1 2 3 affected the mod sounds, the 8 mode works so the eeprom is ok, i have the dry signal on the tl074 at pin 5 and 7, i have reflowing the pins on the mix knob, nothing change.

Thanks i will do these check and let you know 💪

there is plastic insulator on the back of the pots, that blob in the pic look like solder lead but is the transparent things it come out when you solder. i checked the continuity to the pot and it's ok. I also cheked that the blob doesn't short the 2 points.

when i turn the mix knob to wet i have no sound at all the dry signal and the vol pot is ok checked voltages at FV-1 pins 6, 8 & 23 - all read 3.3v

i think they were free algos, at this point i will ask mr pcb to buy just the "software"

man i d'like to DOWNLOAD some/all the bin/source files, i don't need the eeprom , i already have it.

Are the binary files or the source files for these algorithms avaible?

everything is clear thanks, but I was wondering if it was possible to have the compiled files of the algorithms present in the custom eeprom list found on the site, so as to make a personalized setlist myself. @PedalPCB

I just got an Octagon, is it possible to have all the programs available so I can load or modify them to my liking? I already have a chip programmer, I just need the algorithms thank you

tried the cap modification, but it's too subtle, I think I'll try the wampler one or maybe part of it MOD DETAILS: R57 - change to 3k3 R44 and R62 - change to 1k C28 - change to 10nf capacitor AND 1k resistor in parallel D8 - change to 1N4001 D9 - change to 1N4001 AND 1N34A in series D11 -...

I use it on a jcm900 with hotrails minibukers 👍 i will try this mod thank you

I have an old Boss DS2, I like the way it sounds but I would like to remove some of the fizzy, can you recommend some mods?

by mistake I had put a 10k resistor in the r7 and also in the r12! thank you very much to everyone and to @Robert :love: , now the pedal sounds great! thanks to this forum I have saved my ass a lot of times 🙏

with gain pot to max those 4 pins are connected pot gain to zero those are connected

Some specific advice?

ic1 pin 7 is 4.5v and S4 is 0v ic2 pin 8 is 16.30v ic2 pin 4 -8,6v

same issue

yes a plastic adesive button