Search results

That did it. Thanks so much @music6000. I ended up using a 750 ohm. I will probably do a 560 on the next one.

Will report back. Thanks for chiming in.

This thing sounds killer, gets into univibe territory to my ears. Short of pulling it out of the box and changing the speed pot, is there a resistor change I could do to increase the speed? My build works fine, just hoping to get more available speed. Thanks fellas.

Wow, you guys are picky!! On an overdrive I would not hesitate to use a 470k or 560k if that's what I had.

Looks like you might have a short on pins 19/20 on the FV 1?

Correct, it is a 12, I got that and the 5 mixed up. My bad.

I can only help with the Electrovibe. I have built 3 now, f'ing killer. 78L12 Here is a thread I started regarding the bulb. https://forum.pedalpcb.com/threads/electrovibe-bulb.7727/#post-68087

One more question before I fire up the iron....should I go 2M? Then I have the volume pot to dial it back if it's too much. Also, if I was to use a pot to dial it in, I would use lugs 2 and 3? Sorry for the newb questions, Still learning

Ok, thanks, will report back.

Quick question fellas. I gigged mine this weekend and the tone was glorious, but I did notice the small volume drop. Would R4 need to go up or down to increase volume?

Mach 1 is killer for my style, and I have one that lives on my live board, but wouldnt mind having a double with a boost. Super easy and fast build too. Maybe I will dig out one of my 1590x boxes and make a triple with reverb.

I was thinking of making a double with an episode and some sort of OD. On hand I have a 763, a Mach-1, and a guitarpcb TS. I play blues/RandB stuff in a few gigging bands. What say you for the second circuit in a double?

Looks like 1n4007 diodes instead of 1n4001, I don't know enough to know if that would make a difference, so wait until others chime in before you start desoldering. Also, do you have any type of insulation between the pot and PCB?

I did mine like Paradox. Sounds great.

Any luck buddy?

Then something is wrong with your jack or footswitch wiring. That should work even with no power, so you need to get that fixed before you can do any additional trouble shooting.

Does bypass work?

I took my newly built Duckbox to rehearsal last night. May have been better on bass than guitar, and it sounds good on guitar.

So badass, going to the lab (garage) to do some resistors on mine right now. Great video. Since build docs aren't up, can you confirm the values printed on the board are good? TIA.

An absolutely outstanding amp. It is loud enough (clean loud) for almost any room I play without a mic, yet retains great tone at lower gigging volumes. Eats pedals for breakfast. Best I have ever have had. The tremolo is cool, but I usually use a pedal to avoid taking the footswitch to...