Search results

I would maybe drill the FS hole a little bigger and try to find a big washer to cover the mistake.

I would probably drink myself to death if I had to start troubleshooting that. I am thoroughly impressed.

My main gigger is a 1965 DR. I put some used Phillips 6V6 in it 3 or 4 years ago and have played a million gigs with it since.

I am not the expert many here are, but I would check footswitch and wiring. Has to be a short somewhere in the LED/switching portion and the adjacent wiring. Awesome sounding pedal. Love mine.

The man has spoken. Thanks!!

Oki, that's two votes for 4148, should I do it?

Thanks, I have millions of 4148's. Manfesto, thanks so much for the quick reply and don't take this wrong, but can someone else confirm? Also, if the 4148 will work can someone tell me why? Trying to learn.

I missed the post, lol.

So, I bought the board, did some resistors and then realized I don't have the something 408 diode. What should I get? EDIT: I am sitting here looking at the populated board that is missing one part.

Where?

Sounds like an awesome hardware store.

I have some of the Taydas that worked well (I guess, nothing to compare to) in a duo phase. What would be the optimal LDR? IDGAF about cost. EDIT: You already answered the question, thanks.

Got two boards ordered. What bulb is needed? Which LDRs? If the answer is STFU and wait for the build docs, then that is what I will do as a I fantasize endlessly about the warbling swooshy tones to come.

Did the output jack twist to where the tip connection is touching the enclosure? Also, is there a little solder blob between 2 and 5 on the FS?

I'm embarrassed. Since the problem seemed to be intermittent, I focused in with a magnifying glass on my soldering and found a shitty solder on one of the E caps. Fixed that and we have lift-off. What a circuit!! Now I need to build a few for buddies!! Have a gig tonight, so I'm going to...

I'm back, damn. Drinking some craft beer. I boxed it and of course the problem reared its ugly head again. I de-boxed and went through everything. I noticed something odd, which is the only place on the entire circuit where the layout is not exactly symmetrical: R38B is 68K, and R46B is 3k9...

I was using electrical tape, but it is green and leaks light. I tried a beer bottle cap (have PLENTY of those floating around in the garage) and it was too big. I am honestly digging the sock idea beacuse, well, it's a sock. I guess I might have to grab a sixer tonight in that case.

False alarm. It works perfect. Time to drill. I started to take voltages, and noticed a funky looking chip. I had broken the legs on one of the 072s during install. Popped a new one in and all is well with the world. I love this thing. I used tape to cover the LEDs and LDRs. Some light...

Hello harmonica enthusiasts. So I got the 7660scpas and that took care of my noise issue. Now I have another one. Phaser B is tits mcgrits. I got it all biased up and it kills. Phaser A is being an ass. I get a very loud cop siren or car alarm sound. Biasing changed the frequency...

Just checked, They are7660cpa. Will order the correct part and report back. I have heard funky charge pump noise before, and I suspect this is the issue. Thanks for the quick reply.