Search results

Conspiracy 2 commit child labour???

IS THERE A SCHEMATIC FOR THIS???? 🤡

My surgical tubing is a hose from disposable low volume air mask so yeah, that’s as surgical as it gets. Those masks are used in infarmys and operating rooms. Yeah, tubing is in. Installed new bridge and changed other pickups too, but something’s still off. I’ll try changing tone caps next as...

My problem child is an SG-like Aria CS-250 so no pick guards or other hollow sections apart the switch and pot cavity. Fixed topmount bridge and so on. I’ll look that article up!

Took guitar apart for bridge change and noticed PUs fit too tightly in their cavities. Maybe that is the source of unwanted body resonance pickup?

Yes,,,If it has clean blend. Where do these noise gaters dwell?🤡 Good! At first I thought you’re not helping, but on the other hand you really might have a point there. HB on neck and p90 (hb sized) on bridge, both originally bridge PUs. Selector switch leaves coil start hanging there on air...

Better to start a thread about this as ”use less gain” isn’t a solution. Long story short replaced crazy microphonic og pups in my main guitar with a wax potted ones. They were fine at first, but after problem came back. Whole guitar is piezo and no matter where I tap it’s heard through...

Haven’t done any transistor based PPs, but I’ve messed with tubes. Would your circuit be tweakable with adjustable bias or bias balance as it’s done with tubes? If the old NPN is cooked I’d go replacing PNP and NPN sides with new transistors and adding a bias adjustment addon there. With tubes...

Dunno if this helps, but while ago I cooked couple Ge transistor exceeding their max current limit with trimpot on FF circuit and after that my cheap component tester read cooked transistors as shorted/faulty component. Cannot recall if it was E or C tied to B, but nevertheless that gave a diode...

Some E83CCs and couple 5751s bought within last two years. Haven’t really looked into manufacturing time, but there’s always a chance they date earlier.

Couple months ago I bought NOS Telefunken 12AT7 from my local shop with ~20 coins and I know they’re reliable and test their tubes. Still it wasn’t good and had terrible microphonics. Got money back and they let me too keep the tube. Haven’t had guts to test it again, but maybe some day it find...

PM’d.

I have three leftovers of a quad. The fourth one gave up and made a good flash. Willing to trade those for some NOS ecc83 goods. Maybe we first need to wait this import/export toll thing figure itself out?

I’ll try to get on with it in next few days!

IMO Ionosphere sucked, is this more worth building? If it is, I’ll verify your layout within couple weeks.

Im both offended and amused at same time about the realization sludge/doom/stoner is the goth.

You’re good if the changes make you to play guitar more and current channel volume difference fits your needs better than stock circuit.

Have you tried jumping R17 with alligator clips if it brings Clean vol up? I’d start from there if there’s no cold solder spots or other problems you catch visually or with DMM. If jumping R17 works, maybe change Clean side switching circuit same as in OD side. Edit. hold your horses and do...

Now it all starts to make sense as concept described at start was a bit hard to grasp. If it’s tone and vol only, why not go mechanical route first with sliding pots or rollers (like in keyboards) attached to regular pots?

It’s the reason I use Ge-FF as first pedal in board. Why it isn’t possible? What you’re doing seems complicated and I wonder wouldn’t it just be enough to include (AMZ) pickup simulator w/ transformer or real pickup coil into the fuzz box circuit or before it like others do it and call it a day...