Search results

Hello, I ordered the Muzzle in kit from Musikding. I built it some years ago, but this time I got the three SMD chip 4305 adapter PCB. That's new for me. I have to start to populate the PCB, but I'm reading some issue with this adapter, and now I'm little bit worried. I'm not sure if I...

Maybe I can help you at least with the Graphite Distortion, I make a research just yesterday. You know that is the Mad Professor Grey Stone Distortion, right? Search the original version schematic, and to make the modern version you just add in parallel those three parts. - The 47nF cap in...

Very nice pedals and very nice pedalboard! How those illuminated knobs work?

I heard, sometime, about the squeal/whistle/oscillation problem in the Tyrian or more than else with a diy replica of the Revv G3 pedal using different board, like veroboard. Maybe protoboard not. I never built it, but I think that a signal track longer than G4 (Sanguine version), the mid boost...

That was referred right to the PAL800. Someone of us are trying to get the schematic of this new version.

In another thread, I guess, someone revealed to me that those transistors are double: in one package there are two transistors, so six pins. This is what I get.

I always thought that the two pedals schematically are pretty much similar. The difference is in the impedance. (TS 808 is true bypass). Maybe, this caused the interaction with the amp that could make sound "better" the TS808. What do you think?

I built it on veroboard. I never understand why the Decay pot don't do anything. (I made the mods by Sabrotone, but I think I used TagBoard layout).

My soldering station is a cheap one, I think I have no much tips to choice, and I guess there's no way to find those strange tips. I should to buy a better one, but honestly, I don't want to spend it now. This one work since years, and the only problem has been to replace the tip with another...

Musikding doesn't sell a sharp tip of the MLS-48 soldering station. I don't know why. I had to buy a new one, but it's round, indeed. Not so good to solder smd transistors. (if you know where I can find a replacement sharper tip of the MLS-48...) I'm thinking about a new cheap iron solder to...

My memories was wrong! I thought the MicroAmp Plus had Gain, Tone and Volume. Anyway, buy an used pedal, look inside and re-sell it, is not a bad idea. Maybe we should looking for someone who have it to take some gutshot pictures, at least.

Though the Micro Amp is very famous and well known simple circuit, I never got any information about the Plus version with tone and output volume. There are some imitation of it with the tone pot (the master volume could be just a pot in the end of the circuit), but nothing about the original pedal.

Hello Another order from Banzai and another disaster. I never lost money, but today this is the risk. I included in my order, with other stuff, this items: - CTS potentiometer with DPDT switch. BUT the description didn't say it was full shaft, and I needed a knurled shaft. - Cap selector switch...

I bought some years ago, for mistake, two 4700uF cap. :rolleyes: Is the schematic available? Just to take a look, else it doesn't matter..

On my breadboard I included the +9v/-9v supply and of course it worked (I was testing just the op-amp section). I got a lot of volume, and close at highest volume setting I got op-amp clipping (TL071), honestly it's not so nice. My emulator software says it's over 25db, after all. Even if it...

I know it was something like that. Well, I have no reason to include the +9v/-9v power supply. I'm sure it will work fine. No, really. :D

I redrawn the CE-1 preamp from the original CE-1 chorus (voltage part is simplified, just to work around on my software). I try it on breadboard, starting from same basic, I don't know if there's something wrong, because it doesn't work, though the schematic is that. First of all I excluded for...

Did you place your pedal before or after the drive pedal? Being a chorus the CE-1 should be after eventually fuzz, drive, etc. Anyway, I'm working on it.

As I said early to see the schematic would be great, but I think that should be just the same schematic we can see in the CE-1 Chorus Ensemble, with one exception. Looking the PCB here https://www.pedalpcb.com/product/pcb481/ in the MichaelW's PCB C2 is missing, but it seems to me that the...

Too see the schematic would be very appreciated! Meanwhile, I have some concern about the hiss problem with this circuit. At least two users here had this problem, if I don't wrong. Someone built even this stripboard version, too, with the same noise...