Search results

Yes, diy is the way. You should also make the fp smaller to not always get errors in the drc when using the standard 2.54mm grid

Color labels are vinyl sticker sheets for my laser printer. Transparent labels are transparent sticker sheets. Even though both say "waterproof" etc I always put a transparent sticker sheet on top. Still have to tinker with the color saturation. Sometimes it's to pale sometimes to dark...

Thank you guys! I used a few of his schematics to build pedal. Always nice but this one is different. The most current version is it, he didn't have issues with it. It depends on if you are able to get your hands on it :-)

Hi guys, I play my bass in the living room with a EBS Preamp/Headphone Microbass and I wanted something similar for the Guitar. Just using what I have is not DIY :-) It's a box with a - Baja Reactor - Omnicab - Stereo Headphone amp with Aux-In and an additional mono out to drive a cab in case...

Thanks!

Thank you for the explanation. So where would then be a perfect place to hook up these two grounds? Near the jack I suppose? I'm asking because I want to make my own smaller pcb for this large project.

Hi guys, can anyone explain why the Aion Redshift needs the pwr_gnd around the IC3A in the LFO section (if that's it) ? https://aionfx.com/app/files/docs/redshift_documentation.pdf Madbean uses one gnd for everything on his version Kezuroukai the...

Did the shipping change for the US? I use to order with option „Europaket“ DDP which was around 3€ for up to BB size pcbs but it was raised to over 5€ for my last small pcbs. So the pcb was 1,85€ and the shipping almost x3…. (VAT excluded)

Which transistors did he check? JFET for example have interchangable drain and source. If you want something really good for transistors get a Peak DCA75. It's expensive but "worth" it. Edit: a nice comparison

I don't know if it's him but he want's to sell them in the future. Resin casted clear shaft.

My purple metallic is much darker…. And the metallic colors in general are so easy to scratch. My next orders will be non metallic.

I uploaded the zip again including an interactive bom because the part names are not readable on the pcb. It's one of the best plugins for Kicad ("Interactive HTML Bom").

Hi guys, this is a transistor switch for comparing up to four transistors. Every transistor has a switchable bias trimpot and there is a terminal for dmm probes. I hope this makes sense. I used it a few times but the bias fiddling is crazy. Remove the .txt at the end then you have a zip file...

During a Kicad update I must have broken some libraries so I tried to fix the project today. Don't use it directly as it is but it might be usefull to tinker with it. Inside the zip is another zip containing the gerber files I sent to JLCPCB. This is the one from before the update so it should...

Very nice design! Is the Uberdrive so good because everyone is saying it or is it really that good? I think it really is that good :-)

Is this info from the build doc somehow related to this problem or only related to the input signal strength?

https://www.mountainkingelectronics.com/megalith-order But as mentioned the caps should be rated accordingly.

For my unit the manual range was bad so the paper did it for me in the beginning, then I changed the led and it was fine without the led.

@eh là bas ma thank you for your explanation. I ordered an led according to the specs from the bom (couldn’t get the original) and it’s much better. But this R26 issue still bothers me.

Some of our coders in the company use ai supported tools but not just to generate code but to elp write the code.