Search results

Thanks FF! We’re a one dog family haha no kids allowed 🙅🏻‍♂️ before she was my wife, I used to have her paint my enclosures! She’s down with the cause 🙌🏻

Anyone else start projects before big events or trips? Decided to start this AND refret my no. 1 the week I left to get married 🤷🏻‍♂️ the refret was much easier haha SO, started this for a friend who doesn’t have a lot of recording gear and I finally finished it tonight! Simulcast is the red...

Never got it figured out. I know in that previous post people suggested swapping out IC’s, but nothing changed for me.

After Benson released the deep sea diver and noticing I have an Ungula & a Cataclysm…I want to combine them (go figure) Now since they both have a tone control, I think it’d be a cleaner look to just combine them to one pot. I know one runs a B100K and the other a B25k, but is it as simple as...

Had these boards done but no 125b’s. I DID however have a 1590XX so figured why not!? Now I know from videos the Greer Lightspeed sounds pretty close to the deco’s od side, but I liked that the Demo Tape was based on a cassette preamp. This was actually my first double build, that I went back...

@Feral Feline dude, thank you for your time and patience!

Yea I’ve only messed with the intelligent bypass once for someone who wanted it on the Circulator. Anyway! I must’ve been a little confused from your previous post…I thought you meant a looping type pcb or breakout board. So I could wire the general like in the build docs and then do what’s...

The bypass looper, are we talking one of the relay modules in the Utility options?

😖 I’m also just now realizing the general tso is buffered out…so I think I’d need to do two footswitches anyways, right?

Well damn lol

I wasn’t even thinking about a status led, but I like the idea of a bi-color! What you now got me thinking about (obsessively) is bi-color leds on the pcb’s spdt switches. In this case the simulcast’s on-off-on and the general tso’s on-on 🤔 Edit: shit would the on-off-on even be able to light...

Thank you! Saw this when I was at work and came up with this as soon as I got home… Looking close?

I’ll have to try and draw something out for confirmation. Little confused haha @Erik S might be right!

I’ve done 2in1’s with an order switcher, but a buddy wants a compressor and a preamp with an order switcher, but both turned on by 1 footswitch. I’ve seen the diagram that shows the 2 to 1, but how would I incorporate the order switcher into that?? Tim

Not the jacks…I have signal when pedal is bypassed.

Wouldn’t I at least be getting some dry signal when the pedal is engaged if it were the trimpot? Hooked it up and was going very slowly, but nothing. Fully CCW got little pops and static. Little more static pop around 1 o’clock 🤔 but no actual signal when engaged, only bypassed

The scratch is what I was thinking it could be. It’s right in the trace of IC2 and the trim

Wired her up, and got nothing. Reflowed solder. I don’t have a DMM because the only issue I usually have with builds is forgetting to check the led cathode/anode 🙄. D1 & D2 are throbbing. I’m getting signal when it’s bypassed. While turning the internal trim, I get slight “pops” in certain...

I had the same issue with this pedal. High pitch frequency when engaged. Most notable when the harmonic & bright switches are engaged.

Oooh I was mixing up P1 with what I’d imagined was the potentiometer on the main circuit board.