Search results

Here you go for tayda based off of that. https://drill.taydakits.com/box-designs/new?public_key=elJZcW9TTEYyaStMREJFYkRhQWhIUT09Cg==

Lets move to DM going forward on these

Give me a few priority boards you want done then I will look at the site and see what the build doc shows. I can use that to figure out what i would need.

Okay folks if you have outstanding drill templates you are looking for I am going to try and start working through them. If you are the one who requested it I will DM you when I get to it. I will need you to get a few measurements for me so you will need to have the board in hand. No pictures...

This is verified now.

Not verified yet but measurements have been taken off the board and build doc. I will marak as verified when mine is built. Note this is for a 125b not the 1590b. This also has top mounted jacks. I use a rectangle for power but you can easily change it to a circle if you choose. All led’s are...

Verified. I took measurements off the drill template and also the physical board. Led's are 3mm with no housing. I originally did top mounted jacks but it didn't work out. This now has side mounted jacks and does work great. The template has been updated...

Do “NOT” use yet. Top mounted jacks wont work. If you want to add side jacks go ahead. I am removing the top jacks. The trim pots and two caps are in the way. I will update with side jacks and mark verified once I check it. Side jacks have been added on the template but i have not verified yet...

First the led is 3mm and where I like it. Move it or change the size if you want. Second I use a rectangle for power. This can be changed easily. 8mm is pretty standard for the smaller non switched power jacks. This is for 95% of the 3 knob projects on Ppcb. Robert follows a pattern generally...

Not verified yet but based on measurements it should be fine. Use at your own risk for now. All leds are 3mm. I have the option for the voltage switch at the top. Remove it you don't want it. The cv output is on the side and a 3.5mm jack. Adjust size if you want. Generally I dont like side...

Here is another diy board i use sometimes. Sex Panther is a Klon Master Splinter is a Modified Rat based on the vfe rat Carlos Spicy Weiner is a germanium OD Chiseled af is the ppcb caeser Wayback machine is the amethyst delay from aionfx

3mm leds. Adjust to taste. https://drill.taydakits.com/box-designs/new?public_key=T0Uva2Y4Ym9KUFhQaGZ0U2NjZUg3Zz09Cg==

3mm leds and rectangle power. Adjust to taste. Robert’s standard 5 knob but its not on the site. https://drill.taydakits.com/box-designs/new?public_key=NnNsRHRrREI2SHNETDlhcFV6TnBnUT09Cg==

Its Robert’s standard 4 knob template its just not posted on the site. 3mm leds and rectangle power so adjust to taste. https://drill.taydakits.com/box-designs/new?public_key=SW9XemNKTXNuRFFMVE5sYXU5bkNmQT09Cg==

Led is 3mm and top jack is rectangular. Adjust to taste. https://drill.taydakits.com/box-designs/new?public_key=bkpxOHVEeGxoaXdmcUNqN0Fpb0ZOQT09Cg==

Leds are 3mm and tope power jack is rectangle. Adjust to taste. https://drill.taydakits.com/box-designs/new?public_key=eXB6VUVYek92NUxta3ozKzVNUWNyZz09Cg==

Leds are 3mm. I prefer the rectangle power jacks so adjust to taste. https://drill.taydakits.com/box-designs/new?public_key=K0Mzbi9QbFkxRjAvNVRYMXBJMEtZdz09Cg==

Both are the same template. Leds are 3mm with no bezel https://drill.taydakits.com/box-designs/new?public_key=L1BRTmVvQjN1UERCNDMrY2w3aExnZz09Cg==

All leds are 3mm. https://drill.taydakits.com/box-designs/new?public_key=bGFwMXNGdnhlSzg0d1IyWEt6OEROQT09Cg==

Verified. All leds are for 3mm no bezel. Adjust to taste. https://drill.taydakits.com/box-designs/new?public_key=WXd1WjErSWI1UWEvVDVrTzB2TG1GZz09Cg==