Search results

***BASS ALERT!! BASS ALERT!!*** Tested initially with my Guild Polara into my little orange crush test amp. Tried with my tele... Sounded decent. But man, this sounds pretty effing dope on bass. [edit: tried it through my Sunn Sonaro and 2x15 cab--the treble content still sounds a bit harsh...

Hm! Always with the learnings. As always, much appreciated, thank you, CDB. I have to admit, I totally forgot about the JFET substitution, not that remembering would have changed my ignorance about the diode function and orientation.

Well, I'm not going to pretend like this one didn't give some trouble. Mostly because I let the first stage sprawl a bit, and it cramped everything else and made soldering through little windows not super fun. Forgot a resistor in the power section, melted a cap, banged up the array a bit with...

A google lens search returned this: So, apparently designed by John Dyer Baizley from Baroness, and sold by Sonny, the dude who made the pedals, so I guess, yes, official.

I hear that--but you are talking about the redundancy of diodes in the original design? Did the rerouting of R1 to ground require D1 be removed for the circuit to function properly, then?

It might have to do with the feedback loop that CDB attenuated in his mods, but I agree that if it's a different version, you have to see the schematic to hazard a guess.

You can always take a gander here as well

Good thing I have a deep list of Chuck D Bones-touched circuits to breadboard and PTP before I ever get to this one. I don't know if there's a functional relation, but the loops off the IC remind me of the Corroder/Rust Drive.

Is this a solder bridge I see before me? middle-left lane, under the A10k pot.

According to the GGG schematic, it's 100n. If you go to the other thread, feral feline did a solid and outlined the changes from a green Russian. There are a couple other changes as well.

Yep, there's a whole discussion Here. Still in breadboard form for me as I still have to retest and try some stuff.

That is super weird. I've never had that experience, and I'm not sure IPA would be the culprit since it evaporates within a couple of seconds. In future, the best thing to do after a thorough visual inspection and component check is probably an audio probe--you can find out where the gating...

Dang it! I was just about to post about the Marshall pedals. Many demos.

Looks like your TL074 is in the wrong way. If there's only a dot, use the dot (pin 1) to orient ICs; if there's a notch, the notch takes priority. The sockets are agnostic to the plastic they're encased in, it's the pin connection that matters. I use 32-pin in-line snappable sockets.

I think there is currently questing around this.

I really like this. 1 main stereo mic input and 4 open XLR/ts inputs, expandable to 6. So, it's kind of like a very portable 4-6 track recorder/mixer. I bought it for field recordings and sound collage. The 32 bit float allows recording very quiet sounds and quite loud sounds without needing...

Also Skreddy Super 100

There is a list of Marshall in a box circuits somewhere here--might be a good starting point. Now, particularly for the verisimilitude of a Plexi voicing, I don't know, but the Colombo Plexi Breed/Golden Falk is pretty darn good. Subdecay Variac OD also

Well shucks and consarnit. Was looking to implement the Pyrocumulus tone stack and realized I'd done made breadboard errors. Breadboard ferkakte because I neglected to put in C11 (10 nf to ground off tone pot) and instead stuck the 10nf in C12, which was supposed to be 100nf. Rectified it...

True, although it's worth mentioning for the record that the Sunnbeam and Sasquatch are Effects Layouts boards, and the Apostle is a GCI board. I think the Sunnbeam error is on the pcb print and is noted in the build docs [edit: as you mentioned--need more coffee]. The Apostle, as far as I...