Search results

Also, parallel blending will get you a distinct sound but it will not be the same as your normal series stacking.

I meant the other 99.9999% of the pedal buying population. 😁 But as long as we are here, other than color, shape, and "noise", I don't. So please, do tell, if you would be so kind.

Does anyone really know the difference between carbon comp, carbon film, and metal film resistors?

I have yet to see a standalone mixer/blend pedal that only adds clean blend to an existing pedal's sound. They all bypass to clean rather than effect only. It seems opposite to me.

And then there is this page that has a range comparision https://lifestyle.jimdunlop.com/find-your-cry-baby-wah/

https://www.jimdunlop.com/justin-chancellor-cry-baby-wah/ Anybody know what the UK Filter is? The copy says : "The U.K. Filter mode uses a custom solid-state circuit designed to emulate the unique envelope-like filtering of the tone control on Justin's own instrument."

At about 5 min in the video , it says the filter is first

You would just turn down the tone knob on your guitar. When that Res knob is turned down, the cutoff knob is the same thing.

A signal generator goes into the input of a circuit and an audio probe is on the output, so they are separate things. Here is my audio probe. It is just an extension of the amp cable Edit: I forgot to show another alligator clip from the cable ground to circuit ground

It's baffling to me that the guy has zero fucks to give about the actual value of the diy cap, especially since half the video was dedicated to the comparison.

Does anybody pay attention to this? https://hackaday.com/2025/01/27/film-capacitors-can-go-in-the-wrong-way-round-who-knew/

I tried taking IC3B out of the socket and direct soldering a new chip. No change. The green shows where I get strong phasing. The pink is no sound at all. In the red, there is a high pitch squeal that oscillates with the LFO. The yellow is a mid range buzzer sound with no oscillation. The...

After the holidays, Its been slow going with this. Using an audio probe, I managed to get the A side working. The B side, no so much. With the audio probe I get strong phasing on IC2B.1 pin3, but its mute on pin1. On pin2 I get a really loud squelchy sound and I can not quite figure it out. I...

I've haven't tried it but I've heard of people using old USB cables for sheilded wire

They sell pocket size voice changers at the Halloween store for $10. Is it just that you want a custom one? https://www.partycity.com/halloween-voice-changer-177725.html?extcmp=pla%7CGoogle&gQT=1 I have one that does all kinds of crazy stuff

I think this is another case of it's just the player and some distortion. Bucket head is insanely awesome. Check out about 1:14

Here is a closer look at the IC2A area. Sorry about the scars but my edge cutter has developed a bur I need to file down. I don't think of them are deep or severe enough to cut a trace.

All knobs and trimers set to roughly noon. Toggles set to down toward stomps. Looks like IC 2A may have some issues. Here are the voltages using a Onespot. Edit: I mixed up pins 1-3 on IC1B but it's corrected now IC1 A. B. 1) 0. 0 2) 0. 0 3) 0. 0 4) -7.79...

I don't have any others to try. I have a TC1044SCPA on the A side and a TC7662BCPA on the B side. There is no change when reversing which side the chips are on.