-
-
Aentons replied to the thread Blu Tack vs Blue Painters Tape.Also, one of the benefits of bending the leads for me is that I don't have to have the iron out to populate the board. I populate a... -
-
Aentons replied to the thread Blu Tack vs Blue Painters Tape.I don't remove components alot but when I do I heat it up and bend it straight. Seems like much less work to me.
-
Over their head, if you're looking for more precise directions.
-
Aentons replied to the thread Blu Tack vs Blue Painters Tape.Just bend the legs
-
I bend the legs of resistors and caps. Sockets and anything that has more that 2 leads, I tack 1 lead quickly with my iron, position it...
-
Anything I can't keep in place by bending the leads I just hold with my finger. I let the solder hang off the front of my bench and I...
-
Aentons reacted to jesuscrisp's post in the thread Are there many JHS stompboxes based on other circuits from the diy community ? with
Like.
It's not "just a tonebender" in this case but a circuit that emulates a tonebender using silicon transistors following a distinct... -
Aentons replied to the thread Help with 5F1 PCB identification, please.I saw a horned rat holding a stuffy.
-
Aentons replied to the thread Mini (or at least smaller) switched TRS jacks.You could do 1/8" jacks like eurorack. I've seen some folks use those for expression pedals
-
-
Loading…
-
Loading…
