Search results

This one was the 2nd build and worked first go. It is a cool overdrive. =6&hash=026dd325196c995b37b311869d33f09b']Attach files

That was a pot I had that was the same value but didn't have pcb mounts. It's connected to the board with some of the extra lead bits clipped off of capacitors. I am thinking of just pulling it out and using a proper pcb mount pot. It is wired the same as the input jack but rotated a bit. I...

Well this was the first build. I initially had some output but the pedal was way too quiet overall. I turned a few knobs and then it completely stopped outputting sound. I was using a crappy iron for most of this. The level pot might be the issue.

I just had a UV print done for their spring reverb. I don't think I will get to it for months though. WRT to the OP, there are lots of power supplies that can deliver 18v on one port. But I don't think there are any that allow for switching to AC. It will likely require a separate adapter...

I am about halfway through this build. I remember reading about biasing this and can see older build reports with small internal pots for biasing. The most recent PCB doesn't seem to have the trim pots. So does this mean there is no way to bias the J201s? Or has it been figured out so that...

I recently bought a Quilter SuperBlock US. They do the Fender Blackface thing pretty good and are small enough to fit on a pedal board. The only issue is that Quilter let their last container sit in a port for the last 3 months and they don't seem to be putting any pressure on them to unload...

I had been hoping for the Tsakalis Room 40 but this looks like it covers much of the same ground. Very cool.

I screwed up and ordered the wrong switch for mine. Waiting for another one from Tayda.

2 to the power of 4 is 16 in terms of combinations with the heads. I guess it would be hard to get one knob to do that. Too late for me because I already ordered one lol.

It would be cool if they could make the Hydra algorithm able to run on the Arachnid and just have one or 2 of the pots for the heads.

I don't know how to make the corners rounded consistently. Once you convert it to a vector image, it is hard to manipulate since it is multiple small components. I made quite a few recent designs that will probably look like this.

Shipping / postage and mobile phones are 2 things I have come to realize are a complete scam in Canada after living in Australia for over 10 years. I actually can't believe the cell phone data costs there. It is insane. (And Australia isn't exactly known as a cheap country to live in). It...

I might be moving to BC myself but it will be from Australia. I've been out of Canada for a long time. Do you end up getting scammed on GST and duty on all items from the states even if they are less than $50? That's been one good thing about Australia until recently (no "brokerage" fees or...

I am fully expecting that I messed something up in my recent massive order from Tayda...

Looks fine to me!

Was the font 2 toned like that or did you do a white outline in the software to create that effect?

I think I have one of these PCBs on the way from pcbguitarmania. They had delays sending another PCB and offered to throw it in free. I just hope they remembered to since I had a Tayda UV print done for it.

Their 1/4W resistors are actually what you want for most builds. It is the 1/2W ones that are much bigger. They might still work if the board has space. Otherwise, picking up a few resistors from a local store won't make a big difference.

You can go higher than 1/4 watt in theory. However, with Tayda, these are much bigger and might not fit in a tight board. I ordered 1/2 W in one value by mistake the last time. I ended up going to Jaycar to get the same one. They also only had 1/2 in that value but they were physically the...

This reminded me of the small transformer that they use in a passive mid cut circuit. (But I think it was #42TL021).