Search results

do you live in NA or the rest of the world that actually uses the metric system? if NA... just check through the 1/2in(12.7mm=.5in) nutz at a hardware store or home depot/lowes or order a bag from stompbox/amplified parts. Outside that market... then I'd pass to 1 of our german or polish...

and take over by making everybody involuntarily scratch his ears and nuzzle his neck? or just have it blitzkrieg the mice?

or it's new parts under the hood that are cheaper and easier to source than the prior iterations of the EM. The MBP and originals used mn 3007's and this batch might be 3207/3208's and the needed bits to boost headroom from the 9v up to what a 12v puts out.... until we see the guts can never...

I tried the gentle tap tap with a hammer on my P... I had to glue it back together. might just need a little sandpaper on a dowel until the sleeves JUST slide in, for those who build in the future, and the bolt with 2 larger washers will work if you don't have clamps, Buddy's is already together :p

not relly supposed to need to hammer the sleeves in, light pressure with a C or squeeze lock clamp or the hole is to small. tru-oil or tung oil, works wonders and doesn't get sticky like poly. On the body poly is fine you only touch it long enough to pick up/put down.

I ws gonna say "for dinner.... AGAIN?!?!?!"

it's like millions of zippers were undone across the force...

ah yes, late 80's through mid 90's... you could get in to a local event of nearly any kind and only get the plug pulled for covering 'Last Caress"....

check your guitar.... you'd be amazed how many shops use it for the fubar dings and dents in bodies that are getting painted...

I work security at an entertainment venue.. and yeah the meetings the week leading up to 1 of those... we're just short of needing adult diapers from :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: :ROFLMAO: when the boss says 'remind the cornholers they have to keep it in.."

I'd say either pony up for the JB... or use the epoxy you do have to attach sheet aluminum with your new hole alignment... gonna cost anyways you look at it...

I've eyeballed drum sets here and there... once thought of getting an electric set and running that through 1 of Rob's reverb boxes for some vintage Bonham.. likely gone now, but last month at GC I saw a good starting set of Pearls, used for 250, bass, 3 toms and a snare... about 2 hours after I...

that's a new level there goes the neighborhood... and they still value that land that 2 bedrooms in Compton/Watts are worth 500k+

Unless seen in person, I DOUBT the linseed rags did that... otherwise a LOT of impressionist art would have toasted museums world wide! Bet a few other things happened... but other chem soaked materials, do be careful... sick/dead pets may result, destroyed carpets/floor finishes. The thin...

oh boy.... refer back to the keda dyes... ebony stains... only work on certain woods. glad you're just doing it as a grain enhancer.

To this day, still a bunch of skin flints "in charge" skipping out on the bill..... The good beer is imported, with 1 or 2 smaller label exceptions, a large portion of the masses don't get that you have to buy less of it(and getting rid of it later...)

The man at Keda dyes actually recommends stopping at 150 grit, then a light wetting to raise the grain. Keda Dyes what I've gone by when finishing a project.(even with snail mail he's close enough I can get them in 2-3 days max...) I hit 200 grit on this 335 bass and you can see the penetration...

Next time you swap out the strings and then I wouldn't worry about it until something sounds off like fret buzz when you hit a particular note but every other spot is just fine. and Ty Michael for finding that fret beam, better that cost and more universal usage than the 1's from Stewmac and...

I got side tracked with a model train project when I discovered that my spring loaded center punch took a vaca on me... As for painting the enclosure i have 1 or 2 images I want to turn in to a transfer for the outline. an hour or so Friday when I have the free time should see mine finished!

I checked last week, they even had amp kits back in stock:oops: o_O :oops: He doesn't quite say it entirely about the source circuit but in his docs he points out 2 cap changes to shift it to lead/rhythm guitar range vs bass for the bass overdrive board. You're turning in to a Matisse/Van...