Search results

  1. I

    Tayda 15% Discount

    Saw this today: 15% Discount Coupon Code : "Sale15" **Valid till 27 February 2020 ( 11pm New York time ) **Valid to use only on www.taydaelectronics.com **Please make sure to apply discount coupon during checkout, we can't apply it manually after checkout is completed.
  2. I

    Special Overdrive Accent and Tone pots are not doing anything.

    I built this pedal last year, and it's been sitting on a shelf because of the same problem.
  3. I

    MDMA Graphics

    Thanks for the kind words gentlemen. The graphics are becoming less aggravation and more fun. I'm working on my Arachnid graphic while I wait for parts. I'm excited about building this one!
  4. I

    MDMA Graphics

    Thanks. I'm learning as I go...
  5. I

    MDMA Graphics

    I decided to try a simple waterslide decal with this one, since I had some decals here doing absolutely nothing. I accidentally created a vintage/relic appearance by not following the decal instructions :). In case anyone is interested (and does/doesn't want to make the same effect), after...
  6. I

    Tayda package

    Did you check with your neighbors? I've had stuff delivered to the neighbors that said was delivered to my house.
  7. I

    MDMA Graphics

    Oh...NICE! That sounds like it should make things a lot easier. Thank you so much for the advice!
  8. I

    MDMA Graphics

    thank you
  9. I

    MDMA Graphics

    My first attempt at graphics. I was inspired by some of the GREAT graphics I've seen here on this Forum. I used an adhesive-backed inkjet label. I made a few mistakes along the way, but I learned a lot. It's a smidge off center, and the ink was blue before I slapped it on the yellow pedal...
  10. I

    Octave pedal?

    This?answers a lot. Thanks!
  11. I

    Octave pedal?

    OK, you got my attention with the Arachnid posts, and I have some questions, just so I know what I'm getting into. Where do the FV-1 patches come from? How do they get loaded onto the EEPROM, or does that EEPROM come pre-loaded with the patch? And the SMD...how would I solder that? I do not...
  12. I

    Octave pedal?

    Wow! Plenty of good info. Thanks. Time to research these
  13. I

    Octave pedal?

    An Octave Fuzz would be good. Do you have a favorite?
  14. I

    Octave pedal?

    Well, I really don't 'need' one, but I have plenty of ODs, delays, chorus', compressors... I was watching a video on the EHX Pitchfork, so I decided to see if there was anything similar to build. I need my next Winter project, without getting too complicated.
  15. I

    Octave pedal?

    Anyone build an octave pedal that works well?
  16. I

    RKO "Simulcast"

    What labels are you using (Avery? other?)
  17. I

    Sagan Delay

    Yes, great graphics. The foot switches look 'dangerously' close to the Echo Level and Depth knobs though...
  18. I

    SOLVED Nobleman Overdrive Oscillation

    Update: I did as you recommended (Chuck) - Ran separate grounds for signal and power from the board to my test box. Gave the board an IPA bath and scrub with a brush. Touched up all of the solder joints on the rear of the board. Let the board soak in IPA for a while then scrubbed it again...
  19. I

    SOLVED Nobleman Overdrive Oscillation

    I will reconfigure the grounds, re-solder the cold joints, and flush the board as you suggest, but probably not till tomorrow. Busy this afternoon. Priorities... Thanks for all of the help
  20. I

    SOLVED Nobleman Overdrive Oscillation

    I tried Isopropyl on a different board that he built. It made the board 'sticky'.
Back
Top