Search results

Yessir! Thank you! 😄

Really stoked on my Tayda delivery today Guess the pedals 😌

Another Candy metallic blue 😍

Thank you! Yea I read that but haven’t tried it yet. Let me know how it is if you try it! I’m interested in trying at some point.

As I stated in a response above I took the pics prematurely before I wired the jack grounds. They’re wired now to the jack ground connections on the PCB

Probably nothing, I just think it looks nice and holds its bend to frame the PCB. 😋

Yea you are right! Good looking, I caught that when I wired the grounds to the jacks and pulled back the shielding a bit on all sides!

Demo video:

Thanks! Short the input/output to ground you mean? I tried to pull the shielding back a bit more from when I took the pictures so it looked ok when I closed the box. If it causes a problem I’ll change the wire out. Thanks for looking out!

Named it Flangelicious to go with the Psychedelic art vibe, no relation to Electric Druid circuit. Sounds incredible, and versatile with the ability to go between 1 or 2 BBD chips. Worked first time around and easy to bias. Demo: (Using clean split coil, then humbuckers + fuzz for Nirvana...

Doomed to Repeat - PedalPCB Hydra 4 head FV1 Digital Delay Controls: Time = Speed Years = Swell (number of repeats) Age = Age (how degraded repeats are) History = Volume Past/Present = Mix (full dry/full wet) Dimensions 1/2/3/4 = Delay heads Blue sparkle enclosure looks great in the light...

Ahhh you guys are right, that whole side was not soldered! I ordered it as presoldered so i didn’t even think that would be an issue there. Would that be a reason the EEPROM is reading 0 voltage across one side of the chip roo

No signal still

Just finished building the Hydra Delay. I get signal through on bypass, and signal when pot set to fully dry. No signal with Wet. LED lights up. Using 9V center negative adaptor.

Appreciate all the love! The Si and Ge symbols are one of my favorite parts too 😄

Thanks! It’s a 1590DD. Just enough room to comfortably wire everything together

Thanks! I’m very happy with it and now very much back into my addiction of building. Can’t wait for the next ones! 😄

I switched the location of the Vol and Fuzz controls on the enclosure art so I had to free wire those. And the input hole was blocked by the Big Muff board so I had to turn that 180 degrees. In the end it all worked out though! Lessons for next time.

Not sure what happened to my inside shots, I thought I uploaded them! Here ya go:

Affectronix 4uzz. My original concept 15 years ago I built 4 variations from the “Multi-face” article, no footswitch and in a plastic RadioShack enclosure. Decided to improve upon the concept as I get back to building again. The 4-in-1 classic fuzz box. And first UV print job from Tayda (used...