Search results

  1. C

    Double Arachnid mega pedal

    Here is schematic for the clock board. So the three holes are for power, ground, and output
  2. C

    Double Arachnid mega pedal

  3. C

    Double Arachnid mega pedal

    The trim pot is the only control. I used a regular pot so I can adjust it. The other wires are for connections to the circuit. I do not remember right now what they are
  4. C

    Double Arachnid mega pedal

    I like the internal programs, and it easy to set up. Just a SPST switch to ground from a resistor I do not have the schematic with me right now. The clock, I first saw on the EQD Afternearth pedal. Pedal PCB does make a PCB for it. It just gives you another control option.
  5. C

    Double Arachnid mega pedal

    That is really nice. On my build I added a switch so I can either use the EEPROM or FV1 chip programs. I also added the clock board so I can adjust the clock speed and put a switch in so I can either use the clock if the board or the internal crystal
  6. C

    I added the mid control to my Thermionic Distortion to make it a Little Debbie

    3PDT
  7. C

    FV 1 volume

    Old one
  8. C

    FV 1 volume

    I built the Arachnid and with the volume maxed it barely gets to unity level. Would I need to raise or lower the 100k volume pot to get more volume? Thanks Rob
  9. C

    250k dual log pot

    Like this one? https://www.taydaelectronics.com/potentiometer-variable-resistors/rotary-potentiometer/linear/b-250k-ohm-linear-dual-taper-potentiometer-pc-mount-round-shaft.html
  10. C

    New Tyrian Distortion pedal compare to?

    Sure, the Sanguine came out first and was the G4. I asked if he was going to make the G3, and the Tyrian came out.
  11. C

    New Tyrian Distortion pedal compare to?

    I believe this is the clone of the Revv G3, and the Sanguine is a clone of the Revv G4
  12. C

    Tuesday.

    And ordered. Do you have the bill of material for these new pedals?
  13. C

    Tuesday.

    Yessss!!!!!!!!!!!!!!!!!!
  14. C

    Tuesday.

    Damn it, I just sent in my order, and I bet the other (2) I am waiting for are what you will be adding to "in Stock".
  15. C

    Tuesday.

    What does Tuesday mean?
  16. C

    Question about restock and new board designs

    I need my PedalPCB fix..... I cannot wait for the new G3, G4, and Dwarven Hammer boards to come in. Anyway to get bill of equipment lists for these projects?
  17. C

    I added the mid control to my Thermionic Distortion to make it a Little Debbie

    I added the mid control to my Thermionic Distortion to make it a Little Debbie by making a vero board. It works. If anyone is interested here is the vero board. Just remove C18 and R21, and add this into your pedal.
  18. C

    Seabed Delay

    I tried the pedal again, the click or distorted sound happens mostly on low notes or if I strum the higher notes harder. It sounds like it is only the delayed notes making this sound
  19. C

    Seabed Delay

    Here are new voltage readings: TL072 1 = 4.26 2 = 4.26 3 = 4.26 4 = 0 5 = 4.26 6 = 4.26 7 = 4.26 8 = 8.53 PT2399 1 = 4.97 2 = 2.48 3 = 0 4 = 0.05 5 = 2.66 6 = 2.41 7 = 0.92 8 = 0.93 9 = 2.48 10 = 2.48 11 = 2.48 12 = 2.48 13 = 2.48 14 = 2.48 15 = 2.48 16 = 2.48 With all controls off clean...
  20. C

    Cataclysm Delay

    I tried it again today, and it worked as it should. Not sure why it had noise before.
Back
Top