Search results

I'm torn between using 1590B cases w/side-mount jacks vs 125B with top-mount. The 125B would be narrower and offer more internal space, but there's something I love about 1590Bs. I just saw the 1590B with top-mounts, and looks like the best of both worlds - just looks like a TIGHT fit. I'm...

My build process goes in phases (usually), especially when it comes to enclosures, which is what I've been focused on lately - I usually work on drilling/finishing 3-4 cases at a time. The Electrovibe is in this batch - I started drilling, then saw the LED holes in the faceplate. I haven't...

ERRGGGGGGGGH! Never mind - found it.

Building out the large/regular Electrovibe with the faceplate, and looking for the correct (or compatible) LED bezels to fit the pre-drilled holes. The older 5mm ones I had on hand did not fit. What are folks using for these?

I just got the Stagecoach/BUSS fww Ed board recently, but had a vero board of the Small Fry waiting on the shelf for a while now. Not sure I want to do BOTH (which will be the obvious response here :cool: ) as I've got a bit much on my plate at the moment, so I wanted to get some feedback. Are...

Thanks - wasn't really asking about the LS - just the differences between the Timmys + Tim.

Don't know why, because they've been out forever, but I'm getting the itch to build a Timmy. I have a Lightspeed vero build in the works, then saw a demo comparing THAT to a TImmy, and now GAS it hitting me. My problem is, I don't know the differences between the Timmys (v1 - 3) and Tim. Can...

Don't have anything to offer, but I hope you get it fixed. The Brown Betty (in the Dirty Shirley config) is one of the best classic/vintage Marshall (AC/DC, The Cult 'Electric' album) pedals that I've found. With the bass dialed back to 9 o'clock or lower, treble and presence around 3 o'clock...

Very well said. I've got an etched HF-2 board (125-B sized) which I configured during the COVID quarantine, that I still haven't gotten around to building. About the power filtering mention above, this board can build both flangers - IMO the power filtering is just a plus. Gorgeous builds!

Did AionFX do a Metal Zone? I can't seem to find it on their site.

Resurrecting this one - getting the itch for some metal.

I'll give that a try - thx!

Finished up my PPCB Nucleus (XTS Atomic Overdrive) last night. It works fine, but compared to other dirt pedals I have, it's quite compressed and doesn't feel as 'open'. As it is using JFETs in a config similar to Jack Orman's Miniboosters, would using all 2N5457s instead of J201s (or even...

Looks great! I've got a vero board one waiting in the pile, but might have to expedite it.

Wampler did that WAY back when, briefly. I forget the company name it was under, but he had kits similar to GGG - i.e. the classics - but also a few Wampler circuits as well. I still have the CrankedAC PCB.

Best looking pedal I've seen in a while - well done, sir

Could I conceivably use the V1 board and update with the V2 values?

I built one recently and I'm underwhelmed. I guess I'm so used to Big Muffs and Fuzz Faces - this one sounds more.........messy......than the other fuzzes. Like more inarticulate. I'll play with the transistors a little more, but at this rate, it's going on the shelf.

I was going to say..........Tatooine?