Search results

I’ve got a Death by Audio Evil filter pedal. I really like it, but it’s laughably huge. I don’t like, nor do I use the fuzz on it, so that leaves just the filter side. I’m wondering if anyone knows of, or has any suggestions for a similar style filter pedal PCB that would (I hope) fit into a...

Does anyone have a recommendation for an attenuator for a vintage Fender Champ? I cant recall off the top of my head but the speaker is sub-4 ohm and has RCA connectors. I'm sure many know, despite being small and "only" 5 watts, it can get very loud. I'd love to be able to bring that down to...

All (except Modern Revolt) are in 1590B enclosures for pain and suffering purposes. I have yet to perfect the top in/out/power template and its my least favorite part of this enclosure. I have little knowledge of Devi Ever, and what I have read, makes me want to keep it that way. Some of...

Russian diodes don’t always have the band on the cathode side You can see the cathode ball in the diode on the incorrect side.

day late and a dollar short, but those germ. diodes seem to be backwards. You can see the cathode ball on the anode side... or am I off base?

Ive gone nuts with these smaller Mask Audio's, cramming them into a 1590B for pain and suffering purposes. Well, its mostly the top in/out and power but still. I really like the Red/Yellow, the MSB and One Knob Clang. Im going to build a Modern Revolt Octave Fuzz, and depending on how tall...

late to the party, but I just built this one. When you have both toggle is Ruby mode, is there a lot more static? Ruiner (both up) seems pretty dark also, same for you?

Messed around with rattle can paint and water slide decals.

No, I just printed letter size. I’m curious now if A4 @ 100% fixes this… Decided to have a go at hydro-dipping the enclosure, came out kinda cool

Finished up the build the other day. Everything went together as expected and without a hitch, with a couple exceptions. The rotary selector pot has a different Z height than the standard pots and toggles and at first I couldn’t figure out why everything was not sitting flat but at an angle...

This one has been done for a couple of weeks. It went together fairly easily, the only real issues I experienced were the trim knobs needing some precise settings because when in the 27v mode the pedal would squeal like hell. I basically adjusted them both down until the squealing stopped...

well, the switch seems to be functioning fine... I'm at a loss right now as to why the left two controls (rate and sens) dont work when the switch is up. Unless they are not supposed to, but there is few documented builds about this pedal. One guy here had the same problem, and one other guy...

so, a bit of an update: I jumped the anode LED to the anode of the zener because I had somehow managed to bork the LED holes. Now the LED works as it should. That said, the first two knobs (Rate and Sens) do not work in the switch up position. Is there any way to determine of a toggle...

I somehow managed to mess up the led pads, have t done that in a long time.

That solved it! Thanks. I still have a weird LED issue. When the toggle is in the down position, the LED reacts like it should, pulsing on/off as the LCR reacts. But when the toggle is up, the LED doesn't work at all. I had to solder a jumper from the LCR + to the LED anode, wondering if...

Sorry, see pics.

I get bypass. When I turn it on, no knobs really do anything except the blend knob. Ihave swapped the LF398N, and get same results. I don’t see any solder bridges. The only thing I can think of at this point is the LCR0203 is faulty. I got a bag of them on Amazon, rarely buy components there but...

Where’s the pcb from? (The surfy bear clone)

I swapped a NOS RCA 12AT7 in for shits and giggles. Since a 12AT7 is roughly 70% gain if a 12AX7 is 100, and (drum roll….) it behaved exactly as one would expect. Less gain, have to dail up the gain knob to about 75% to match what a 12AX7 would be at about half way. Just a report for future...