Search results

Ok, so it's all together. Can confirm it works, almost. Somewhere between out of the enclosure and installed in the enclosure I'm getting some issue. I'll probably post to troubleshooting if I can't dubug it myself, which will most likely be the case. haha. There's gotta be something grounded...

Really glad it helped you guys. Beautiful stuff, Barry!

That is so rad! Definitely reppin the bde. haha

Flat side on the board is negative, yes. Every time I've used LED's the longer lead is the Anode(+) and the Shorter lead is the Cathode(-). Though recently, someone posted this which is straight confusing. haha.

Correct!

Test to make sure both the caps and IC's will fit in those before you lock em down. Some of the fatter leads don't fit in those. Resistors and most but not all diodes fit in those and caps generally have fatter leads than resistors. You will probably want to get IC sockets for future builds but...

Wish I could give you an answer but, regardless of what you end up using, I'd definitely recommend putting a socket where they go so you can swap em out until your preference is met. Fwiw, Smallbear has some of the hfe specs on their site for Si NPNs. What's it for?

Get well soon, bud! Looks great and nice playing!

Those are very accurate descriptions. I built the informant last year and found it to be too creamy for me. ? Appreciate it!

Sweet! Thanks for your post, it really helped. I am going to omit the LFO LED all together. When I built my first one I didn't like how it was always on with the pedal bypassed. I don't really need to see the modulation anyway. Hehe.

Ok cool. Thanks heaps!

Also, on the topic of mods. Not sure if I understood it fully, but I believe it was Chuck D. Bones who said that if you replace D1 & D2 with schottkey's the oscillation will be quieter? If I read that right I may put sockets there to try it out.

I'm pretty sure that's what I have. When I hook the footswitch up to my DMM's continuity test it beeps when I depress the switch and is silent when not pressed. Does that sound right? Any idea if my hookups look right for the trimpot?

I would like to build a Magnetron Delay with mods that have done before here in the forum but am having doubts whether my notes are correct after reading through previous posts. Here are some previous posts on the topic of the momentary havoc switch: Danbieranowski's & jjjimi84's Here's what...

Moving sucks but THAT is awesome!

That traffic cone really ties the room together

Thanks, everyone! Well considering I know next to nothing about circuits nor how to read a schematic I'll read pretty much anything as it were gospel if one sounds clever enough. :sneaky:

That is ridiculous. I love it.

Thank you. It sounds really great. I'm a big fan of hard clipping distortion. This can sound like a Rat then go 10 times further. All the while sounding loose and nasty like a good Rat. Both switches down (Expand) is probably not for everyone. I love how it sounds like it can't take it anymore...

Thanks. It was rare moment of clarity for me. hehe