Search results

So in our village there’s this social enterprise place where leftovers from local industrial stuff gets sold - lots of half rolls of fabric, Perspex with some bits cut out, offcuts of leather and so on - it’s great. Today I went down and got £1 bought me a whole strip (50) of Borns 10k...

So I’ve built a load of pedals, Mutron clone, Aion’s L4 preamp PPCBs skeptical buffer who have used bipolar power supply’s. Most others use a monopolar power supply (if that’s what it’s called) +9v and gnd with the vref being fed into the input … I get that bipolar power supply is how older op...

quick question that's possibly so obvious that I've missed something... Tayda's PPCB drill templates are all listed as "sold out" - why? when do they become available?

here’s an odd one, a bloody buffer, who needs a buffer? Well a while back I helped a mate build a PPCB frequency interchange filter, and trying it at the start of my signal chain - even with the filters turned to have as little effect as possible it seemed to make a big change to my pedalboard...

I’ve searched, I’ve googled and lots of things about isolated power come up… If I wanted to add a switchable send return loop to a pedal design… presume buffer on send and return to avoid any impedance issues - is transformer isolation needed to avoid ground loops? Thinking of combing an input...

Years back I was at art school and one of my sculptures was a radio mast - made of 2x2 about 5m high with branches tied on it to disguise it as a tree… at the bottom was a 1950s Sony transistor radio on a platform, and a vintage bike wheel with rope around it and a handle - if you spun the...

So asking here as it's full of people with knowledge.... and this is a problem I had 3 years ago and sold the pedal... then bought it back.... I have a pedal board. It sounds good. Power comes from a Cioks DC7 - with isolated supplies, included grounds isolated from one another. The DC7 plugs...

My favourite preamp ever is a Warwick Hellborg one - they made it for a short time and a silly price ... then blew them out cheap at Thomann and I hesitated and missed out... the thing is the magic was in the first preamp stage - I could turn the DI off and it would still sound great... From...

Any suggestions where to get an enclosure like this? I'm guessing custom made but thought I would ask the collective hive mind!

Hello I built @aion 's wonderful L4 preamp - channel 1 has a fender style tone stack - but it's missing the capacitor between the treble and bass going to the R6 that a fender tone stack would have.... I've stuck it in TSC and what I put in for the fender tone stack and what it shows is kinda...

Going to get a few enclosures printed, Gorva M45 in matt black, printed in black - any tips to keep the finish protected while I drill them? Obviously clean up the metal filings as I go, but wrap them in something? there's something obvious here I can\'t think of

TLDR version: First time getting trying JLCPCB's assembly service ... 1N4148 in SOD123 size 0805 125mW resistors 0603 50v MLCC caps SOIC-8 TL072 Will be ok? Anything I should know for SMD layout that I don't know yet?! Large 1m resistor, power diode, film and electrolytic caps, pots and...

I don't build masses, and tend to buy kits from Musikding ... so my parts drawer isn't massively extensive. Howveer I do have a MN3207 which I notice isn't a cheap IC - Think it was left over from over ordering for my low tide mini... what should I build to put it in? (also relevant, bass...

I want to build a prunes and custard/curds and whey - but no bigger than 1590b - PedalPCB pcb is a little too wide for 1590b :( so looks like I’ll be doing my own Which got me looking at the smaller gorva m45 - which I know can be done with all top jacks - just is it a good idea too?!

Hello Need help … I built an Aion Lumitron - build report here https://forum.pedalpcb.com/threads/aion-lumitron-mutron-iii-with-some-mods-a-bass-player-solders.23253/ Schematic is here https://aionfx.com/app/files/docs/lumitron_documentation.pdf And a screen grab for your ease is here…...

So I got a kit from Musikding and it all went together super quickly! It’s the Lumitron design of a Mutron 3 which was just super simple build - the sister board for the 3pdt footswitch is a bit different to the ppcb approach but makes sense I guess… While they make them nice and easy to build...

I picked up a secondhand broken pedal kit off someone, and he chucked in a faulty mxr bass overdrive deluxe for free. Basically the thing doesn’t seem to be filtering the signal going into the detector- so there’s a constant noise coming out when the bass is plugged in but muted. Roll off the...

I was looking at the schematics for the Moog MF-101 last night and opened KiCad to start building a version in there... Is this a fools errand to even be thinking about? Should I just get that clone with the pirate on the front? help

I was looking at some Reverb pedals, and realised the Neunaber pedals I liked were built on FV1 So started looking at some other reverbs and found some nice sounding things on the Z-DSP platform.... I then saw on some modular synth forum where they had decoded the pins on the cards to use in...

Right, so this might be a common problem but it’s impossible to google… I built Aions trace of the L4 preamp https://aionfx.com/app/files/docs/l4_bass_preamp_documentation.pdf It has a LED indicator that the limiter circuit is limiting. It switches on a bit late (ie well into limiting) but...