Search results

Any protests in the USA against these boycots?

Well there is the courier Driver (mid driver) you could build or use the schematic. https://www.pedalpcb.com/product/pcb544/

In Europe we have Euro circuits. I hope I did the calculation right but just one board is 135 euro. No tarrifs, just the board. I dont know how this tarrifs are effecting pricing for Europe though.

Haha. You kicked him of the ladder? Electrical wiring Netherlands: Brown is fase. (230v) Blue is zero. Black is switchwire, green/yellow earthwire.

You mention the FX loop of the hx stomp Manual page 38. Raise the return volume and check the mix.

Power red and black ground. Black between the board and breakout board Orange in out. So the answer your question: No

My guess is the nutube needs to be on the other side. Then the pot can be soldered the usual way.

Yes your right. Time to step up from painting by numbers and raise the bar. I need a bakingdish and a breadboard.

The emperor has new clothes.

Yeah. Now I remember. You made a demo.

You might like the Mofeta(model T)

Since I removed the IC and have to order a new one; Mojo parts or available parts?

It rubs off easy

Is the red a liquid out of the capacitor? And therefor a died capacitor?

Zener?

Log =lug haha Forgot to mention bypassed signal works. Are the two jfets working as a flip flop? So one is open the other closed? Edit: Yes flip flop. I surprise myself understanding a little bit more than I thought: http://www.geofex.com/article_folders/tstech/tsxtech.gif

Schematic is not right. The burned 100u has no number en the c20 is c21 on the board. I dont understand how I can measure 5,6 volt on all three lugs of the level pot. The pot itself measures 85 k on the outside logs and middle log measures 85k maxed out both settings. So the potential on all...

Not sure why it burned. Not my pedal. Wrong power supply is my guess. But I am not sure. It is my first real attempt troubleshooting and it is gonna take some time. Thats ok. I use the schematic and try to follow the traces. I measure 8.95 volt and around 5,6 volt??? after the voltage divider...

What can I do to have a bit more lowend on this pedal?

Signal is gone at the junction R23 R24 engaged and disengaged.