Search results

The jptr fx warlow vs the ehx v4/v5 opamp muff

Figure I might as well build a dream fuzz now just for the fun of it. Can one have too many fizzes? Question, how much different does the warlow sound from the original?

I started with the trim pot and have much better results. I had I turned way down and with a very small adjustment got rid of most of the noise. I don't have any OPAs laying around but might get some on my next order and see if there is any difference.

Bought them from StompBoxParts and haven't had a problem with their stuff in the past?

Built the Caesar chorus and I really like it but it definitely is not clean sounding. Kind of has an edge of breakup sound to my ears. Wondering, what it is about this circuit that gives it that "dirty" quality? Is this something that can be modified to produce a cleaner tone or do I just...

Hmm, guess I just figured that since they were trying to copy the Mayonnaise sound from Siamese Dream that it was an opal version.

How does the Umbrella Mayonnaise Fuzz stack up with some of these options?

I'm wrapping up a 2204 jcm800 clone right now, but the combo lead/bass looks like the answer I've been searching for!

See, something dumb just like I thought! Thanks for the help

Working on a JCM800 clone and am running into a weird continuity issue in testing. I am getting continuity between ground and both the tip and sleeve on the speaker output. Does anyone see any glaring issues? I'm sure that I am missing something dumb but would like some extra eyes to take a...

Hahaha

Thanks, looks like I have some studying to do

How do you like the pedal baby?

Does anyone know of the power amp of the orange super crush 100 is the same as the orange pedal baby? On the surface, they look the same but trying to confirm.

I replaced C3 with a 100nf and my rate is nice and slow like I wanted it. Can still get a good warble by cranking up the lag. I socketed the 100nf to play around in the future with it, but I got some distortion in the path now, so might rethink that idea.

Robert was right. Unboxed the pedal and everything worked again. Re-wired and re insulated everything and re boxed, and now we are in business! Thanks for all of the help! I really want to say thanks to Locrian. As frustrating as this troubleshooting session was for me, you really gave me...

Ok I have remove the volume pot. I get continuity between pin 5 of the foot switch and pads 2 and 3. Also get continuity from pin 5 to output tip and pcb out pad.

So trying to understand this for future use. if I want to leave the foot switch out and have the pcb always on, I can just run the in and out pads directly to the jacks? What then happens to the ground and sw pads?

I do have signal in bypass and also previously had the wet signal working as well

Right after posting my last comment, i happened to bump lugs 1 and 2 on the volume pot while connected to pin 5 on the switch. Turns out that all of the lugs on the volume switch are grounded. :confused: