Search results

Oops thank you!

I don't have much of a particular use case for this but figured I'd make one in case I ever need a balanced out for a pedalboard. As far as the build, as you can see I wrapped the power jack and back of board with electrical tape to make sure it doesn't short since I didn't secure this board in...

Works great. I should probably start wiping off the flux before I post pictures. Some notes that may be of use. I used the 125b enclosure drill template to help me find good spots but your mileage may vary. I soldered the led after it was already in the hole and board screwed in. I could have...

Anybody have more info on this yet? Electrosmith still has them in stock. I made a terrarium last month but still haven't loaded any software on it. I'm thinking about making a funbox so I have a stereo digital pedal as well. Or designing my own board for the seed so I have different IO options.

Oh ok cool. Thanks for your help!

I got that I just can't find info on this one. I just remembered that google lens exists though and was able to find a link for a similiar part. Not an exact match because the bottom is different but close enough that it might just be a production variation for the same spec...

Just bought this wah to gut for a tearjerker build. Has a hot potz 2 100k so perfect value for the tearjerker. Also has an inductor that is shaped like the dunlop EVH one but just has the dunlop logo on it. I can't seem to find information on it and can't measure it. Anyone know what these are...

oh ok I misread that then. I suppose I should try mine out some more and dial in some different tones to find what it's good at. For a fortin modded tubescreamer I was expecting more range for all the controls.

Hell yeah glad you got it to a point that you like! Did you happen to write down any of the component swaps? Seems like all the box caps are stock values. Hard to tell with anything else. I'll have to get around to modding mine at some point.

I appreciate it! I did go ahead and check around that and they looked right. So I got to probing today and probed after the 1n34as to make sure they didnt break plus its a bit of a halfway point, and there it was plenty loud like i expected the hm2 to be. But then on the other side of the 10k...

If I use extra gain and crank up the treble on my amp it's almost like the it is doing things right. Still can get a little chainsaw action. But ultimately it's way too quiet, too dark, and low gain. (Confirmed side by side with an actual hm2 plus with everything dimed it's quieter than dry...

Alright with wishful thinking and trying it through my computer cuz it was late at night I thought I fixed it but it's not fixed. Way too dark, not enough gain, I must've fucked up something. Gonna try and figure it out. Anybody got ideas? Is it cuz I used a box film cap in the spot of an...

Complete with a foot switch topper just for y'all <3 Originally I had accidentally put 1uf cap in c11 instead of 1nf and it was too quiet and too bassy. Fixed it though!

Apparently this is a ceres clone? Someone said it in the reviews or a forum or something and it's got me tempted

Conveniently I have a EV preamp board on my desk and would probably be running into the same problem. Checked the schematics and for the EVPreamp board that same mod would be to change R2 to 4.7M and R9 to 6.8k. Figured I'd share that in case anyone ends up referencing this post and wondering...

I like to refer to "Thall" as spooky djent

Nice! So power jacks can fit above the audio jacks in an 1590lb...🤔

Thank you! I'll probably tack the proper size components on to my next tayda order then.

I didn't like the grand orbiter v4 that I had for a while. I wanted a more adjustable phase 90 and it was just too different. Mostly cuz I didn't like the lfo. Think I should make a modded one of these?

True, like falco suggested you could just use one of those red/green biLEDs. Have the red half be the on/off and green be the tempo. 2 less holes 2 less bezels. But the enclosure already looks so empty and big. I voted 3 out of the options though