Search results

I found that I did have 2pm the JFETs that were outside the proper bias voltage. I replaced some resistors and adjusted my trim pots and all was good. Thanks for the help.

I have a question regarding a M800 pedal I’ve built. My pedal works but I have a sound issue I’m not sure about. Ive used MMBFJ201 jfets in my build and have tested them and they work. The issue I have is when gain on the pedal is rolled down it’s sounds more like a fuzz than a distortion. I’m...

Do you think we will see a modified version of the m800 that includes these two switches?

Thank you all for the help. I'm kind of new to the build process and didn't to make a silly mistake or be missing something.

Hello, Could someone help with a part numbers for cap on a duocast build? Im fairly new to pedal building and I’m having trouble locating electrolytic caps rated for 35V that will fit properly in the location layed out. Thank you.

Here is a picture of the board with one pot removed for better visibility of the board. Any ideas or tips would greatly be appreciated.

I resolved the constant humm now I only have bypass sound. The power led comes on but no sound when I move the pots. Is there anything else I may be overlooking?

Thank you ill try swithching them around and trying it. I really appreciate hour help.

Hello, I have just built a King Midas overdrive. The pedal works in bypass mode and the clean signal has no issue. But when the pedal is engaged I do get the led for power. The issue is that their is a constant loud hum and no guitar signal seems to be making it through the pedal. This hum is...

I have replaced the TC1044S with an TC7660sCPAZ. Same issue as before no real change.

I'm not using any buffers before or after. I'm just using the pedal plugged into my amp. Ill post some pictures of my board.

Hello, I have built 2 Kliché Overdrives, and both have the same issue. I have looked at schematics and looked back over the components on the board but cannot find my issue. The pedal works and my led comes on but and my bypass clean works as well but, when the volume or gain is turned up too...